x4412 触摸屏只能用一部分

5656an · 发表于 2016-11-8 14:08:54

4412板子移植上android4.0后，（镜像文件是自己编译的，官方的镜像也用了），出现同样的问题，只能点击最上面一排，下面所有的都不能触摸。

所有bootars都试过还是不行，移植qt测试过硬件没问题。望大神指导新手！

5656an · 发表于 2016-11-8 14:11:09

### Tx: Basic delay / Rx: Basic delay

count: 5
# Tx: Disable / Rx: Basic delay

count: 6
## Tx: Disable / Rx: Inverter delay

count: 7
### Tx: Basic delay / Rx: Disable

count: 8
### Tx: Inverter delay / Rx: Disable
mmc read failed ERROR: -19
data.dest: 0xc6105274
data.blocks: 8
data.blocksize: 512
MMC_DATA_READ

count: 1
# Tx: Inverter delay / Rx: Inverter delay

count: 2
## Tx: Basic delay / Rx: Inverter delay

count: 3
## Tx: Inverter delay / Rx: Basic delay

count: 4
### Tx: Basic delay / Rx: Basic delay

count: 5
# Tx: Disable / Rx: Basic delay

count: 6
## Tx: Disable / Rx: Inverter delay

count: 7
### Tx: Basic delay / Rx: Disable

count: 8
### Tx: Inverter delay / Rx: Disable
mmc read failed ERROR: -19
data.dest: 0xc3cfb784
data.blocks: 1
data.blocksize: 512
MMC_DATA_READ
** Can't read from device 1 **
Boot with zImage
## Loading init Ramdisk from Legacy Image at 41000000 ...
Image Name: ramdisk
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 166013 Bytes = 166013 Load Address: 41000000
Entry Point:  41000000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.15-9tripod (root@cdw-ThinkPad-X200) (gcc version 4.4.3 (GCC) ) #4 SMP PREEMPT Tue Nov 8 09:16:37 CS6
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: SMDK4X12
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412011)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] EXYNOS4: PLL settings, A=1500000000, M=800000000, E=96000000 V=350000000
[ 0.000000] EXYNOS4: ARMCLK=1500000000, DMC=400000000, ACLK200=24000000
[ 0.000000] ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
[ 0.000000] EXYNOS4: ACLK400=24000000 ACLK266=800000000
[ 0.000000] uclk1: source is mout_mpll_user (6), rate is 100000000
[ 0.000000] uclk1: source is mout_mpll_user (6), rate is 100000000
[ 0.000000] uclk1: source is mout_mpll_user (6), rate is 100000000
[ 0.000000] uclk1: source is mout_mpll_user (6), rate is 100000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 800000000
[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 50000000
[ 0.000000] sclk_pwi: source is xusbxti (1), rate is 1500000
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1832000 s7584 r8192 d12896 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259842
[ 0.000000] Kernel command line: console=ttySAC3,115200n8 androidboot.console=ttySAC3 lcd=vs070cxn tp=gslx680 cam=ov2655 mac=00:08
[ 0.000000] DM9000 using MAC address: 00:09:c0:ff:ee:58
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1023MB = 1023MB total
[ 0.000000] Memory: 601964k/601964k available, 445588k reserved, 293888K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000]    vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000]    fixmap  : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000]    DMA    : 0xfea00000 - 0xffe00000 (  20 MB)
[ 0.000000]    vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
[ 0.000000]    lowmem  : 0xc0000000 - 0xee000000 ( 736 MB)
[ 0.000000]    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000]    modules : 0xbf000000 - 0xbfe00000 (  14 MB)
[ 0.000000]    .init : 0xc0008000 - 0xc004b000 ( 268 kB)
[ 0.000000]    .text : 0xc004b000 - 0xc0728000 (7028 kB)
[ 0.000000]    .data : 0xc0728000 - 0xc079b680 ( 462 kB)
[ 0.000000]       .bss : 0xc079b6a4 - 0xc08d8230 (1267 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:456
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 2991.71 BogoMIPS (lpj=7479296)

5656an · 发表于 2016-11-8 14:12:10

[ 0.045000] pid_max: default: 32768 minimum: 301
[ 0.045000] Mount-cache hash table entries: 512
[ 0.045000] Initializing cgroup subsys debug
[ 0.045000] Initializing cgroup subsys cpuacct
[ 0.045000] Initializing cgroup subsys freezer
[ 0.045000] CPU: Testing write buffer coherency: ok
[ 0.045000] L310 cache controller enabled
[ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[ 0.075000] CPU1: Booted secondary processor
[ 0.095000] CPU2: Booted secondary processor
[ 0.115000] CPU3: Booted secondary processor
[ 0.115000] Brought up 4 CPUs
[ 0.115000] SMP: Total of 4 processors activated (11966.87 BogoMIPS).
[ 0.120000] print_constraints: dummy:
[ 0.120000] NET: Registered protocol family 16
[ 0.125000] exynos4_pmu_init: PMU supports 4412(96)
[ 0.125000] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.125000] EXYNOS4: Initializing architecture
[ 0.125000] s3c-adc exynos4412-adc: attached adc driver
[ 0.125000] samsung-pd samsung-pd.0: power domain registered
[ 0.125000] samsung-pd samsung-pd.1: power domain registered
[ 0.125000] samsung-pd samsung-pd.2: power domain registered
[ 0.125000] samsung-pd samsung-pd.5: power domain registered
[ 0.125000] samsung-pd samsung-pd.4: power domain registered
[ 0.125000] samsung-pd samsung-pd.6: power domain registered
[ 0.125000] samsung-pd samsung-pd.7: power domain registered
[ 0.125000] samsung-pd samsung-pd.8: power domain registered
[ 0.130000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
[ 0.130000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
[ 0.130000] s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
[ 0.130000] s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
[ 0.130000] UMP: UMP device driver  loaded
[ 0.130000] s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
[ 0.130000] s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
[ 0.130000] s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
[ 0.130000] s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
[ 0.130000] s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
[ 0.130000] s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
[ 0.130000] s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
[ 0.130000] s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
[ 0.130000] s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
[ 0.130000] s5p-sysmmu s5p-sysmmu.16: Initialized for exynos4-fimc-is.
[ 0.130000] s5p-sysmmu s5p-sysmmu.17: Initialized for exynos4-fimc-is.
[ 0.130000] s5p-sysmmu s5p-sysmmu.18: Initialized for exynos4-fimc-is.
[ 0.130000] s5p-sysmmu s5p-sysmmu.19: Initialized for exynos4-fimc-is.
[ 0.145000] bio: create slab <bio-0> at 0
[ 0.145000] SCSI subsystem initialized
[ 0.145000] usbcore: registered new interface driver usbfs
[ 0.145000] usbcore: registered new interface driver hub
[ 0.145000] usbcore: registered new device driver usb
[ 0.145000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.145000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.145000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.145000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.145000] s3c-i2c s3c2440-i2c.6: no platform data
[ 0.145000] s3c-i2c: probe of s3c2440-i2c.6 failed with error -22
[ 0.145000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 0.145000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.150000] Bluetooth: Core ver 2.16
[ 0.150000] NET: Registered protocol family 31
[ 0.150000] Bluetooth: HCI device and connection manager initialized
[ 0.150000] Bluetooth: HCI socket layer initialized
[ 0.150000] Bluetooth: L2CAP socket layer initialized
[ 0.150000] Bluetooth: SCO socket layer initialized
[ 0.150000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.150000] Switching to clocksource mct-frc
[ 0.153352] Switched to NOHz mode on CPU #0
[ 0.153606] Switched to NOHz mode on CPU #1
[ 0.153616] Switched to NOHz mode on CPU #2
[ 0.153733] Switched to NOHz mode on CPU #3
[ 0.157076] NET: Registered protocol family 2
[ 0.157191] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.157597] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.158593] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.159168] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.159174] TCP reno registered
[ 0.159182] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159202] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159424] NET: Registered protocol family 1
[ 0.159525] Trying to unpack rootfs image as initramfs...
[ 0.165007] Freeing initrd memory: 160K
[ 0.165107] PMU: registered new PMU device of type 0
[ 0.165238] Exynos4 : ARM Clock down on idle mode is enabled
[ 0.166422] Loaded driver for PL330 DMAC-0 s3c-pl330
[ 0.166429]  DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 0.166701] Loaded driver for PL330 DMAC-1 s3c-pl330
[ 0.166708]  DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.166789] Loaded driver for PL330 DMAC-2 s3c-pl330
[ 0.166796]  DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.169761] highmem bounce pool size: 64 pages
[ 0.169912] ashmem: initialized
[ 0.175482] fuse init (API version 7.16)
[ 0.175707] msgmni has been set to 602
[ 0.176192] io scheduler noop registered
[ 0.176198] io scheduler deadline registered
[ 0.176232] io scheduler cfq registered (default)
[ 0.176929] lcd: select vs070cxn
[ 0.177332] s3cfb s3cfb.0: [fb2] dma: 0x68ef4000, cpu: 0xee859000, size: 0x004b0000
[ 0.182581] Console: switching to colour frame buffer device 128x37
[ 0.184778] s3cfb-fimd6x, parent clock: 800000000, vclk: 51208000, vclk div: 16
[ 0.334723] s3cfb s3cfb.0: registered successfully
[ 0.334996] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.680190] s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
[ 0.765045] s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
[ 0.840047] s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
[ 0.925044] s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
[ 1.849148] console [ttySAC3] enabled
[ 1.930121] x4412 beep driver
[ 1.936210] brd: module loaded
[ 1.939977] loop: module loaded
[ 1.941890] wm8994 1-001a: Failed to get supply 'DBVDD': -19
[ 1.947290] wm8994 1-001a: Failed to get supplies: -19
[ 1.952619] i2c-core: driver [wm8994] using legacy suspend method
[ 1.958486] i2c-core: driver [wm8994] using legacy resume method
[ 1.965356] CAN device driver interface
[ 1.968292] PPP generic driver version 2.4.2
[ 1.972713] PPP Deflate Compression module registered
[ 1.977582] PPP BSD Compression module registered
[ 1.982545] PPP MPPE Compression module registered
[ 1.987061] NET: Registered protocol family 24
[ 1.992495] dm9000 Ethernet Driver, V1.31
[ 1.996441] eth0: dm9000c at ee836000,ee844004 IRQ 373 MAC: 00:09:c0:ff:ee:58 (platform data)

5656an · 发表于 2016-11-8 14:13:27

[ 2.004139] usbcore: registered new interface driver dm9620
[ 2.009654] usbcore: registered new interface driver zd1211rw
[ 2.015350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.021944] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 2.027027] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 2.034121] s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
[ 2.045046] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 2.049300] hub 1-0:1.0: USB hub found
[ 2.052707] hub 1-0:1.0: 3 ports detected
[ 2.056954] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.062908] s5p-ohci s5p-ohci: Already power on PHY
[ 2.067717] s5p-ohci s5p-ohci: s5p OHCI
[ 2.071546] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[ 2.078577] s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
[ 2.139351] hub 2-0:1.0: USB hub found
[ 2.141632] hub 2-0:1.0: 3 ports detected
[ 2.145871] Initializing USB Mass Storage driver...
[ 2.150575] usbcore: registered new interface driver usb-storage
[ 2.156489] USB Mass Storage support registered.
[ 2.161230] usbcore: registered new interface driver usbserial
[ 2.166954] USB Serial support registered for generic
[ 2.172001] usbcore: registered new interface driver usbserial_generic
[ 2.178428] usbserial: USB Serial Driver core
[ 2.182833] USB Serial support registered for GSM modem (1-port)
[ 2.188872] usbcore: registered new interface driver option
[ 2.194312] option: v0.7.2:USB Driver for GSM modems
[ 2.199325] USB Serial support registered for Qualcomm USB modem
[ 2.205335] usbcore: registered new interface driver qcserial
[ 2.211160] s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
[ 2.211164] s3c-udc : version 15 March 2009
[ 2.224276] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.229729] android_usb gadget: Number of LUNs=3
[ 2.234328]  lun0: LUN: removable file: (no medium)
[ 2.239188]  lun1: LUN: removable file: (no medium)
[ 2.244048]  lun2: LUN: removable file: (no medium)
[ 2.249130] android_usb gadget: android_usb ready
[ 2.253598] Registered gadget driver 'android_usb'
[ 2.258796] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
[ 2.265520] usbcore: registered new interface driver xpad
[ 2.270693] usbcore: registered new interface driver usb_acecad
[ 2.276512] acecad: v3.2:USB Acecad Flair tablet driver
[ 2.281794] usbcore: registered new interface driver aiptek
[ 2.287275] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[ 2.295174] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[ 2.302625] usbcore: registered new interface driver gtco
[ 2.307934] GTCO usb driver version: 2.00.0006
[ 2.312258] usbcore: registered new interface driver hanwang
[ 2.318075] usbcore: registered new interface driver kbtab
[ 2.323471] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[ 2.329275] usbcore: registered new interface driver wacom
[ 2.334668] wacom: v1.52:USB Wacom tablet driver
[ 2.339268] Initial gslx680 Touch Driver
[ 2.343190] [GSLX680] Enter gslX680_ts_init
[ 2.347514] input: gslX680 as /devices/platform/s3c2440-i2c.1/i2c-1/1-0040/input/input1
[ 2.365029] usb 1-2: new high speed USB device number 2 using s5p-ehci
[ 2.500772] hub 1-2:1.0: USB hub found
[ 2.503160] hub 1-2:1.0: 3 ports detected
[ 3.486702] input: gsensor as /devices/virtual/input/input2
[ 3.490984] kxud9 0-0018: Registered /dev/kxud9
[ 3.495493] i2c-core: driver [kxud9] using legacy suspend method
[ 3.501304] i2c-core: driver [kxud9] using legacy resume method
[ 3.507489] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[ 3.512912] using rtc device, s3c, for alarms
[ 3.516769] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 3.523099] i2c /dev entries driver
[ 3.527051] Linux media interface: v0.10
[ 3.530607] lirc_dev: IR Remote Control driver registered, major 251
[ 3.536806] IR NEC protocol handler initialized
[ 3.541317] IR RC5(x) protocol handler initialized
[ 3.546091] IR RC6 protocol handler initialized
[ 3.550604] IR JVC protocol handler initialized
[ 3.555118] IR Sony protocol handler initialized
[ 3.559710] IR RC5 (streamzap) protocol handler initialized
[ 3.565368] IR LIRC bridge handler initialized
[ 3.569731] Registered IR keymap rc-x4412
[ 3.573918] input: gpio_ir_recv as /devices/virtual/rc/rc0/input3
[ 3.579878] rc0: gpio_ir_recv as /devices/virtual/rc/rc0
[ 3.585204] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
[ 3.593393] Linux video capture interface: v2.00
[ 3.598104] gspca: v2.13.0 registered
[ 3.601565] usbcore: registered new interface driver sn9c20x
[ 3.607190] usbcore: registered new interface driver sonixb
[ 3.612746] usbcore: registered new interface driver sonixj
[ 3.618359] exynos-mdev: Media65535[0xd43a3000] was registered successfully
[ 3.625288] [INFO]flite_probe:2068: FIMC-LITE0 probe success
[ 3.630828] [INFO]flite_probe:2068: FIMC-LITE1 probe success
[ 3.636713] fimc_is_init_mem_mgr : [cma_info] start_addr : 0x50000000, end_addr : 0x50bcc000, total_size : 0xbcc000, free_size : 0
[ 3.648891] ctrl->mem.base = 0x50000000
[ 3.652596] ctrl->mem.size = 0xbcc000
[ 3.656240] ctrl->mem.fw_ref_base = 0x50a01000
[ 3.660667] ctrl->mem.setfile_ref_base = 0x50b81000
[ 3.665725] FIMC-IS probe completed
[ 3.669072] Initialize JPEG driver
[ 3.672560] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
[ 3.679166] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
[ 3.685886] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
[ 3.692240] i2c-core: driver [s5p_ddc] using legacy suspend method
[ 3.698340] i2c-core: driver [s5p_ddc] using legacy resume method
[ 3.704417] S5P HPD Driver, (c) 2009 Samsung Electronics
[ 3.709973] S5P CEC Driver, (c) 2009 Samsung Electronics
[ 3.715588] MFC(Multi Function Codec - FIMV v5.x) registered successfully
[ 3.722066] Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
[ 3.728440] Mali: init_mali_clock mali_clock c0742114
[ 3.789696] Mali: Mali device driver  loaded
[ 3.792652] usbcore: registered new interface driver uvcvideo
[ 3.798220] USB Video Class driver (v1.1.0)
[ 3.802535] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe
[ 3.810341] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 3.815603] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[ 3.823530] device-mapper: uevent: version 1.0.3
[ 3.827860] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 3.836081] Bluetooth: Virtual HCI driver ver 1.3
[ 3.840840] Bluetooth: HCI UART driver ver 2.2
[ 3.845193] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[ 3.851335] usbcore: registered new interface driver bcm203x
[ 3.856898] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[ 3.862871] usbcore: registered new interface driver bpa10x
[ 3.868456] Bluetooth: BlueFRITZ! USB driver ver 1.2
[ 3.873378] usbcore: registered new interface driver bfusb
[ 3.878771] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.884408] usbcore: registered new interface driver btusb
[ 3.889798] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 3.895919] cpuidle: using governor ladder
[ 3.900309] cpuidle: using governor menu
[ 3.903555] dw_mmc dw_mmc: Using internal DMA controller.
[ 3.908832] mmc0: no vmmc regulator found
[ 3.912949] dw_mmc dw_mmc: DW MMC controller at irq 141, 32 bit host data width, 128 deep fifo
[ 3.921486] sdhci: Secure Digital Host Controller Interface driver
[ 3.927562] sdhci: Copyright(c) Pierre Ossman
[ 3.931941] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (100000000 Hz)
[ 3.938780] mmc1: no vmmc regulator found
[ 3.942757] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[ 3.952595] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[ 3.998401] usbcore: registered new interface driver usbhid

5656an · 发表于 2016-11-8 14:14:59

[ 4.002512] usbhid: USB HID core driver
[ 4.006616] logger: created 256K log 'log_main'
[ 4.010944] logger: created 256K log 'log_events'
[ 4.015634] logger: created 256K log 'log_radio'
[ 4.020230] logger: created 256K log 'log_system'
[ 4.026400] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
[ 4.031669] audss_init: RCLK SRC[busclk]
[ 4.035567] audss_clk_div_init: Audio subsystem clk source is [EPLL]
[ 4.041714] audss_clk_div_init: RPCLK [96000000], BUSCLK[48000000], I2SCLK[6000000]
[ 4.050161] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[ 4.059682] mmc0: new high speed DDR MMC card at address 0001
[ 4.065385] mmcblk0: mmc0:0001 004G90 3.68 GiB
[ 4.070365]  mmcblk0: p1 p2 p3 p4
[ 4.163810] asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
[ 4.167931] wm8960-codec 0-001a: Failed to add route Line Input 3 (FM)->LINPUT3
[ 4.176138] wm8960-codec 0-001a: Failed to add route Line Input 3 (FM)->LINPUT3
[ 4.184252] asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
[ 4.189869] ALSA device list:
[ 4.191365] #0: SMDK-I2S
[ 4.194102] GACT probability NOT on
[ 4.198551] Mirror/redirect action on
[ 4.201194] u32 classifier
[ 4.203889]    Actions configured
[ 4.207250] Netfilter messages via NETLINK v0.30.
[ 4.211962] nf_conntrack version 0.5.0 (9408 buckets, 37632 max)
[ 4.219462] ctnetlink v0.93: registering with nfnetlink.
[ 4.223355] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.230242] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.237270] xt_time: kernel timezone is -0000
[ 4.240983] IPv4 over IPv4 tunneling driver
[ 4.245710] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.249953] arp_tables: (C) 2002 David S. Miller
[ 4.254491] TCP cubic registered
[ 4.258693] Initializing XFRM netlink socket
[ 4.262560] NET: Registered protocol family 10
[ 4.269870] Mobile IPv6
[ 4.270871] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.277403] IPv6 over IPv4 tunneling driver
[ 4.283487] NET: Registered protocol family 17
[ 4.286470] NET: Registered protocol family 15
[ 4.290880] can: controller area network core (rev 20090105 abi 8)
[ 4.298109] NET: Registered protocol family 29
[ 4.301555] Bluetooth: RFCOMM TTY layer initialized
[ 4.306375] Bluetooth: RFCOMM socket layer initialized
[ 4.311451] Bluetooth: RFCOMM ver 1.11
[ 4.315183] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.321493] Bluetooth: BNEP filters: protocol multicast
[ 4.325705] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.331737] L2TP core driver, V2.0
[ 4.334974] PPPoL2TP kernel driver, V2.0
[ 4.338895] NET: Registered protocol family 35
[ 4.343482] lib80211: common routines for IEEE802.11 drivers
[ 4.350050] NET: Registered protocol family 37
[ 4.353388] EXYNOS4X12: Adaptive Support Voltage init
[ 4.358449] EXYNOS4X12(SG):  ORIG : 2 MOD : 0 RESULT : 2
[ 4.363705] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 4.372365] Registering SWP/SWPB emulation handler
[ 4.376142] DVFS : VDD_ARM Voltage table set with 2 Group
[ 4.381518] CPUFREQ L0 : 0 uV
[ 4.384461] CPUFREQ L1 : 0 uV
[ 4.387422] CPUFREQ L2 : 1300000 uV
[ 4.390893] CPUFREQ L3 : 1237500 uV
[ 4.394353] CPUFREQ L4 : 1200000 uV
[ 4.397850] CPUFREQ L5 : 1150000 uV
[ 4.401313] CPUFREQ L6 : 1100000 uV
[ 4.404782] CPUFREQ L7 : 1050000 uV
[ 4.408269] CPUFREQ L8 : 1000000 uV
[ 4.411740] CPUFREQ L9 : 975000 uV
[ 4.415125] CPUFREQ L10 : 962500 uV
[ 4.418588] CPUFREQ L11 : 950000 uV
[ 4.422090] CPUFREQ L12 : 950000 uV
[ 4.425523] mmc1: new high speed SDHC card at address 0003
[ 4.431073] CPUFREQ L13 : 925000 uV
[ 4.434538] CPUFREQ L14 : 900000 uV
[ 4.437933] mmcblk1: mmc1:0003 SB08G 7.21 GiB
[ 4.442812] exynos4_integrated_dvfs_hotplug_init, max(1600000),min(200000)
[ 4.449292]  mmcblk1: p1
[ 4.449431] ** temperature set value **
[ 4.449434] Throttling stop_temp  = 82  start_temp    = 85
[ 4.449437] Waring stop_temp    = 102 start_tmep    = 105
[ 4.449441] Tripping temp       = 110
[ 4.449443] Hw_tripping temp    = 113
[ 4.449445] Mem throttle stop_temp= 80, start_temp    = 85
[ 4.449449] Trhottling freq = 800000 Warning freq = 200000
[ 4.449453] TC_voltage stop_temp = 13  Start_temp = 10
[ 4.449460] @@@ get_refresh_interval = 0x2e
[ 4.449464] @@@ get_refresh_interval = 0x5d
[ 4.449469] exynos_tmu_init: cpufreq_level[13], busfreq_value[0]
[ 4.450487] Tmu Initialization is sucessful...!
[ 4.451406] s3c-usbgadget s3c-usbgadget: Already power on PHY
[ 4.452446] usb cable = 1
[ 4.452525] exynos_usb_switch: Exynos USB Switch Driver
[ 4.523077] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:59:21 UTC (946688361)
[ 4.532065] FIMC0 registered successfully
[ 4.535717] FIMC1 registered successfully
[ 4.539680] FIMC2 registered successfully
[ 4.543682] FIMC3 registered successfully
[ 4.547592] S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
[ 4.574877] Freeing init memory: 268K
[ 4.586074] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 4.786391] android_work: sent uevent USB_STATE=CONNECTED
[ 4.801621] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.809196] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.818100] EXT4-fs (mmcblk0p3): warning: checktime reached, running e2fsck is recommended
[ 4.825758] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc
[ 4.839571] EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended
[ 4.847294] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc
[ 4.913201] MFC F/W loaded successfully (size: 360104)
[ 4.924249] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 4.932850] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4.937580] android_work: did not send uevent (0 0 (null))
[ 4.942164] adb_bind_config
[ 4.943525] adb_open
root@android:/ # [ 5.034728] android_work: sent uevent USB_STATE=CONNECTED
[ 5.167474] android_usb gadget: high speed config #1: android
[ 5.172177] android_work: sent uevent USB_STATE=CONFIGURED
[ 5.216253] s3c-fimc3: FIMC3 1 opened.
[ 5.930579] s3cfb s3cfb.0: [fb0] dma: 0x693a4000, cpu: 0xef6ff000, size: 0x004b0000
[ 5.943684] s3cfb s3cfb.0: [fb1] dma: 0x69854000, cpu: 0xefbb0000, size: 0x004b0000
[ 5.956269] s3c-fimc3: FIMC3 2 opened.
[ 7.060098] Mali: :::exynos_result_of_asv : 2
[ 7.062983] Mali: mali_dvfs[0].vol = 900000
[ 7.067231] Mali: :::exynos_result_of_asv : 2
[ 7.071519] Mali: mali_dvfs[1].vol = 925000
[ 7.075682] Mali: :::exynos_result_of_asv : 2
[ 7.079997] Mali: mali_dvfs[2].vol = 1000000
[ 7.084250] Mali: :::exynos_result_of_asv : 2
[ 7.088590] Mali: mali_dvfs[3].vol = 1050000
[ 7.163592] init: untracked pid 1874 exited
[ 9.225290] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[ 11.622256] CPU1: shutdown
[ 12.535701] request_suspend_state: wakeup (3->0) at 12535692883 (2000-01-01 00:59:29.575885797 UTC)
[ 13.195061] dm9000 dm9000.0: eth0: link down
[ 13.198357] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.574895] acc_open
[ 13.575652] acc_release
[ 17.922056] CPU2: shutdown
[ 18.422100] CPU3: shutdown

hhy · 发表于 2016-11-8 18:27:50

你加下我QQ2678386261，我发你一份镜像试试

lxz · 发表于 2016-11-9 10:14:47

qt正常，可以判断硬件正常，你试试我们发的新的镜像。

x4412 触摸屏 只能用一部分

x4412 触摸屏只能用一部分