Android4.0下烧录遇到的问题 001 fastboot + SD 的办法

Franklin

1 方法一： ubuntu下用fastboot烧录SD卡uboot的问题：
1.1
我参照手册：x210v3 android4.0平台用户手册 20130724 的第5.6章的方法：
先用 ./mk -ki 生成了 uboot_inand.bin
1.2
我参照手册：x210v3 android4.0平台用户手册 20130724 的第6章的方法：
先重新分区sd卡，

hanson@hanson-desktop:~/x210_ics_rtm_v13/uboot$ sudo cat /proc/partitions
[sudo] password for hanson:
major minor  #blocks  name

   8        0  312571224 sda
   8        1  310509568 sda1
   8        2          1 sda2
   8        5    2059264 sda5
   8       16    1931264 sdb
   8       17    1907757 sdb1
hanson@hanson-desktop:~/x210_ics_rtm_v13/uboot$ sudo fdisk /dev/sdb

Command (m for help): d
Selected partition 1

Command (m for help): 1
1: unknown command
Command action
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

1.3
然后，进入： sd_fusing 目录：
修改了 sd_fusing.sh 的文件 为  uboot_inand.bin
执行烧录如下：
hanson@hanson-desktop:~/x210_ics_rtm_v13/uboot/sd_fusing$ sudo ./sd_fusing_inand.sh /dev/sdb
/dev/sdb reader is identified.
make sd card partition
./sd_fdisk /dev/sdb
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.0123921 s, 41.3 kB/s
mkfs.vfat -F 32
mkfs.vfat 3.0.14 (23 Jan 2023)
No device specified!
Usage: mkdosfs [-a][-A][-c][-C][-v][-I][-l bad-block-file][-b backup-boot-sector]
       [-m boot-msg-file][-n volume-name][-i volume-id]
       [-s sectors-per-cluster][-S logical-sector-size][-f number-of-FATs]
       [-h hidden-sectors][-F fat-size][-r root-dir-entries][-R reserved-sectors]
       /dev/name [blocks]
BL1 fusing
8+0 records in
8+0 records out
4096 bytes (4.1 kB) copied, 0.14146 s, 29.0 kB/s
u-boot fusing
16+0 records in
16+0 records out
8192 bytes (8.2 kB) copied, 0.248244 s, 33.0 kB/s
768+0 records in
768+0 records out
393216 bytes (393 kB) copied, 7.47073 s, 52.6 kB/s
U-boot image is fused successfully.
Eject SD card and insert it again.

不知道红色报错是什么原因，有没有影响？

1.4
启动板子，进入fastboot:
Hit any key to stop autoboot:  0
x210 # fastboot
Fastboot: employ default partition information
[Partition table on NAND]
ptn 0 name='bootloader' start=0x0 len=0x100000(~1024KB)
ptn 1 name='recovery' start=0x100000 len=0x500000(~5120KB)
ptn 2 name='kernel' start=0x600000 len=0x500000(~5120KB)
ptn 3 name='ramdisk' start=0xB00000 len=0x300000(~3072KB)
ptn 4 name='system' start=0xE00000 len=0x10000000(~262144KB) (Yaffs)
ptn 5 name='cache' start=0x10E00000 len=0x4000000(~65536KB) (Yaffs)
ptn 6 name='userdata' start=0x14E00000 len=N/A (Yaffs)

1.5 在UBUNTU 里面启动fastboot 尝试烧录uboot:
hanson@hanson-desktop:~/x210_ics_rtm_v13/uboot$ fastboot devices
SMDKC110-01    fastboot
hanson@hanson-desktop:~/x210_ics_rtm_v13/uboot$ fastboot flash bootloader uboot_inand.bin
sending 'bootloader' (384 KB)...
OKAY [  0.179s]
writing 'bootloader'...
FAILED (remote: failed to flash partition)
finished. total time: 0.234s

我的问题是：我们的fastboot 是否支持inand ？ 为何出现设备错误，如何解决？