修改了init.rc 编译后刷机后白屏，是怎么回事？

jim

x210ii  7寸电容屏

修改了 android.img.cpio 中的 init.rc:
红色为加入部分：

   # gsensor
    chmod 666 /dev/sensor
    chmod 666 /dev/kxtf9_aot
    chmod 666 /dev/s3c2410_serial0
    chmod 666 /dev/s3c2410_serial1
    chmod 666 /dev/s3c2410_serial2
    chmod 666 /dev/s3c2410_serial3

android/kernel/arch/arm/mach-s5pv210/mach-smdkc110.c文件头定义：
#define AT070TN92       1
#define VGA_800X600     2
#define VGA_1024X768    3
#define DISP_MODE       AT070TN92
//#define DISP_MODE       VGA_800X600
//#define DISP_MODE       VGA_1024X768

用命令  ./mk -ki  编译得到 zImage

用dnw + fastboot 刷入：
x210.img （因为编译麻烦此文件为光盘自带文件）

fastboot flash bootloader L:\andorid\uboot.bin
fastboot flash kernel l:\andorid\zImage
fastboot flash system E:\X210II_A\android2.3\image\inand\LCD070\x210.img （因为编译麻烦此文件为光盘自带文件）
fastboot -w

OM5 设置为OFF 后重启开发板，白屏。

secureCRT 中 打印信息详细见附件：
err3-lcd070.zip (8.68 KB, 下载次数: 0)

2013-3-5 16:45 上传

点击文件名下载附件
secureCRT 打印信息

[    4.124400] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[    4.132562] regulator_init_complete: disabling pd_mfc_supply
[    4.137564] regulator_init_complete: disabling pd_tv_supply
[    4.143095] regulator_init_complete: disabling pd_cam_supply
[    4.148897] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[    4.154720] smdkc110-rtc smdkc110-rtc: setting system clock to 2010-02-03 11:44:31 UTC (1265197471)
[    4.165261] FIMC0 registered successfully
[    4.169013] FIMC1 registered successfully
[    4.172969] FIMC2 registered successfully
[    4.175750] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[    4.182418] s5p-tvout s5p-tvout: hpd status is cable removed
[    4.193382] Warning: unable to open an initial console.
[    4.193483] Freeing init memory: 392K
[    4.400902] DBUG_PORT must not use AFC!
[    4.406293] init: cannot open '/initlogo.rle'
[    4.427019] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.429681] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.917885] EXT4-fs (mmcblk0p4): recovery complete
[    4.919456] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[    4.954164] EXT4-fs (mmcblk0p3): recovery complete
[    4.955839] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    4.956550] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
[    4.987707] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    5.033772] enabling adb
[    5.034448] Enabled => usb_mass_storage
[    5.034486] Enabled => adb
[    5.054718] adb_open
[    5.338817] PVR_KWarning): SysFinalise: Version string: SGX540 S5PC110 [478,



/ # [    5.590364] android_usb gadget: high speed config #1: Android Composite
[   11.537469] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[   11.961130] *** 12 BitS ***
[   11.962333] s3c_sensor_open: ASIC revition ID : 1
[   15.506461] request_suspend_state: wakeup (3->0) at 15002787127 (2010-02-03 11:44:42.849753251 UTC)


请高手帮忙啊，折腾很久了。。。

jim

内核里面在menuconfig里面，有一个framebuffer，里面有LCD选型的，选择AT070TN92

为何我的板子里内核里面没有 menuconfig

jim

目前该问题还是没有解决，高手帮帮忙啊。
痛苦的问题啊