x3288V4.0烧写内核后进入不到内核中

o徘徊o

DDR Version 1.00 20150318
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT


U-Boot 2014.10-RK3288-10-g45ba757 (Feb 19 2016 - 17:53:13)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:        Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
failed to prepare fdt from boot!
no power key node
can't find dts node for act8846
can't find dts node for rk808
can't find dts node for rk818
No pmic detect.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2016-02-19#2.19
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0
load fdt from resouce.
Secure Boot state: 0
kernel   @ 0x02000000 (0x005f9d50)
ramdisk  @ 0x05bf0000 (0x00108f9b)
bootrk: do_bootm_linux...
   Loading Device Tree to 05600000, end 0561a989 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...
#上述，使用原source镜像，只有uboot和kenel镜像用的编译之后生成的

o徘徊o

文件系统是由busybox和buildroot提供的