九鼎创展论坛中文版English
登录 | 立即注册 设为首页收藏本站 切换到宽版
查看: 8095|回复: 4
打印 上一主题 下一主题

x3288编译的镜像开机老死机

[复制链接]
跳转到指定楼层
楼主
发表于 2017-11-7 16:35:25 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
本帖最后由 霍斯灬 于 2017-11-7 17:09 编辑

已经按照问题汇总Q8修改了
有时候开机,显示内存不足,但是无法安装APP
串口打印显示:
[  152.732538] sending IPI to all other CPUs:
[  174.311426] dwmmc_rockchip ff0f0000.rksdmmc: req failed (CMD13): error = -110, timeout = 25000ms
[  174.311434] [mmc0] -- Timeout recovery procedure start --
[  174.311446] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[  174.311453] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[  174.311463] [mmc0] -- Timeout recovery procedure finished --
[  174.311468] mmcblk0: error -110 sending status command, aborting
[  174.311475] end_request: I/O error, dev mmcblk0, sector 4309000
[  174.311483] Buffer I/O error on device mmcblk0p12, logical block 65537
[  174.311488] lost page write due to I/O error on mmcblk0p12
[  174.311496] end_request: I/O error, dev mmcblk0, sector 4309008
[  174.311502] Buffer I/O error on device mmcblk0p12, logical block 65538
[  174.311507] lost page write due to I/O error on mmcblk0p12
[  182.183421] dwmmc_rockchip ff0f0000.rksdmmc: req failed (CMD25): error = -110, timeout = 8000ms
[  182.183430] [mmc0] -- Timeout recovery procedure start --
[  182.183442] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[  182.183449] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[  182.183458] [mmc0] -- Timeout recovery procedure finished --
[  206.783425] dwmmc_rockchip ff0f0000.rksdmmc: req failed (CMD13): error = -110, timeout = 25000ms
[  206.783435] [mmc0] -- Timeout recovery procedure start --
[  206.783446] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[  206.783453] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[  206.783462] [mmc0] -- Timeout recovery procedure finished --
[  206.783468] mmcblk0: error -110 sending status command, retrying


有时卡在
[   51.223789] sending IPI to all other CPUs:
[  113.284403] INFO: rcu_preempt detected stalls on CPUs/tasks: { 1 3} (detected by 0, t=8410 jiffies, g=414, c=413, q=1)
[  113.284420] Backtrace for cpu 0 (current):
[  113.284427] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W    3.10.0 #3
[  113.284438] [<c0013ec4>] (unwind_backtrace+0x0/0xe0) from [<c001176c>] (show_stack+0x10/0x14)
[  113.284448] [<c001176c>] (show_stack+0x10/0x14) from [<c0012ddc>] (smp_send_all_cpu_backtrace+0x60/0xcc)
[  113.284458] [<c0012ddc>] (smp_send_all_cpu_backtrace+0x60/0xcc) from [<c00a4a78>] (print_other_cpu_stall+0x264/0x2e0)
[  113.284468] [<c00a4a78>] (print_other_cpu_stall+0x264/0x2e0) from [<c00a53b4>] (__rcu_pending+0x90/0x190)
[  113.284477] [<c00a53b4>] (__rcu_pending+0x90/0x190) from [<c00a7088>] (rcu_check_callbacks+0x160/0x230)
[  113.284488] [<c00a7088>] (rcu_check_callbacks+0x160/0x230) from [<c004519c>] (update_process_times+0x38/0x64)
[  113.284498] [<c004519c>] (update_process_times+0x38/0x64) from [<c00811b0>] (tick_sched_timer+0xac/0xe0)
[  113.284508] [<c00811b0>] (tick_sched_timer+0xac/0xe0) from [<c0059288>] (__run_hrtimer+0x1a4/0x2b8)
[  113.284518] [<c0059288>] (__run_hrtimer+0x1a4/0x2b8) from [<c0059e88>] (hrtimer_interrupt+0x11c/0x278)
[  113.284528] [<c0059e88>] (hrtimer_interrupt+0x11c/0x278) from [<c05b5438>] (arch_timer_handler_phys+0x28/0x30)
[  113.284540] [<c05b5438>] (arch_timer_handler_phys+0x28/0x30) from [<c00a0868>] (handle_percpu_devid_irq+0xf8/0x1b4)
[  113.284550] [<c00a0868>] (handle_percpu_devid_irq+0xf8/0x1b4) from [<c009d468>] (generic_handle_irq+0x20/0x30)
[  113.284560] [<c009d468>] (generic_handle_irq+0x20/0x30) from [<c000e3cc>] (handle_IRQ+0x64/0x8c)
[  113.284570] [<c000e3cc>] (handle_IRQ+0x64/0x8c) from [<c000853c>] (gic_handle_irq+0x38/0x5c)
[  113.284578] [<c000853c>] (gic_handle_irq+0x38/0x5c) from [<c000d600>] (__irq_svc+0x40/0x70)
[  113.284584] Exception stack(0xc0bb5f08 to 0xc0bb5f50)
[  113.284591] 5f00:                   c0bb5f50 00000072 b8d339d9 0000001a c1e472e0 00000000
[  113.284599] 5f20: b8c0742f 0000001a c0bc6fd8 c0bb4000 c0bc6fe8 00000000 19ca268e c0bb5f50
[  113.284605] 5f40: c0079820 c059a4f0 60010013 ffffffff
[  113.284614] [<c000d600>] (__irq_svc+0x40/0x70) from [<c059a4f0>] (cpuidle_enter_state+0x54/0xec)
[  113.284623] [<c059a4f0>] (cpuidle_enter_state+0x54/0xec) from [<c059a6f4>] (cpuidle_idle_call+0x16c/0x27c)
[  113.284632] [<c059a6f4>] (cpuidle_idle_call+0x16c/0x27c) from [<c000e750>] (arch_cpu_idle+0x8/0x38)
[  113.284641] [<c000e750>] (arch_cpu_idle+0x8/0x38) from [<c0078be4>] (cpu_idle_loop+0x1b8/0x224)
[  113.284650] [<c0078be4>] (cpu_idle_loop+0x1b8/0x224) from [<c0078c5c>] (freezing_slow_path+0x0/0x80)
[  113.284659] [<c0078c5c>] (freezing_slow_path+0x0/0x80) from [<ffffffff>] (0xffffffff)
[  113.284664]
[  113.284664] sending IPI to all other CPUs:
回复

使用道具 举报

沙发
 楼主| 发表于 2017-11-7 16:36:46 | 只看该作者
Filesystem               Size     Used     Free   Blksize
/dev                  1006.7M    36.0K  1006.7M   4096
/sys/fs/cgroup        1006.7M     0.0K  1006.7M   4096
/sys/fs/cgroup/memory: Permission denied
/mnt/asec             1006.7M     0.0K  1006.7M   4096
/mnt/obb              1006.7M     0.0K  1006.7M   4096
/system                  1.5G   400.5M     1.1G   4096
/cache                 122.0M   128.0K   121.9M   4096
/metadata               11.7M    40.0K    11.7M   4096
/data                  991.9M    38.1M   953.8M   4096
/mnt/shell/emulated    991.9M    38.1M   953.8M   4096
回复 支持 反对

使用道具 举报

板凳
 楼主| 发表于 2017-11-7 16:38:16 | 只看该作者
有时串口打印能进去,但画面一直卡在开机
回复 支持 反对

使用道具 举报

地板
发表于 2020-9-24 13:30:10 | 只看该作者
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|深圳市九鼎创展科技官方论坛 ( 粤ICP备11028681号-2  

GMT+8, 2024-11-25 13:06 , Processed in 0.018683 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表