x3288CV4.1核心板烧录编译image无法进入kernel,有大神吗

samir.liu

采用官网下载的“x3288_kitkat_170306.tar.bz2”编译的整个系统，编译完后烧录生成的
update.img，还是进入不了系统，具体的串口log如下所示：
DDR Version 1.00 20150318
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=8 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=8 Size=1024MB
Memory OK
Memory OK
OUT


U-Boot 2014.10-RK3288-09 (Nov 27 2017 - 19:51:30)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:  Rockchip platform Board  3288
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
no power key node
pmic:ricoh619
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-11-27#2.19
empty serial no.
checkKey
vbus = 1
RICOH619_FG capacity = 7, voltage_uV = 3780,state_of_chrg=2
RICOH619_FG capacity = 7, voltage_uV = 3780,state_of_chrg=2
read logo_on switch from dts [0]
RICOH619_FG capacity = 7, voltage_uV = 3780,state_of_chrg=2
Hit any key to stop autoboot:  0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel   @ 0x02000000 (0x0065dfd8)
ramdisk  @ 0x05bf0000 (0x00123870)
bootrk: do_bootm_linux...
   Loading Device Tree to 05600000, end 0561ab33 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...


卡在这里怎么都进不去，有大神遇到过吗？

samir.liu

这是石沉大海的节奏，和宣传的技术支持不一致啊，说好的“24小时，48小时呢？”
关于技术支持方式调整的通知

一：论坛
在BBS论坛上发贴询问，是取得技术支持的有效途径，我司技术人员将在24小时内回贴，并尽可能的在
48小时内解决所提出的问题。如遇节假日将顺延。
论坛网址：bbs.9tripod.com
技术支持时间：周一到周五，9：00到18：00

MarcoJun

楼主，解决了吗，我也遇到同样的问题，麻烦分享下解决方法