x3288V4.0内核启动不起来

o徘徊o · 发表于 2018-10-9 12:22:54

In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT

U-Boot 2014.10-RK3288-10-g45ba757 (Feb 19 2016 - 17:53:13)

CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
failed to prepare fdt from boot!
no power key node
can't find dts node for act8846
can't find dts node for rk808
can't find dts node for rk818
No pmic detect.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2016-02-19#2.19
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
pll_src = 0, dclk_hz = 78000000, dclk_div = 5
failed to find part:logo
no fuel gauge found
rk_pwm_config:brightness:255
got recovery cmd from misc.
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x02000000 (0x0061ace8)
ramdisk @ 0x05bf0000 (0x00faaa1c)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561b422 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

省略好多。。。

[ 2.898252] CRU:
[ 2.900065] 00000000: 00000001 9fff0041 0fff0021 00000008
[ 2.905373] 00000010: 00000003 9fff0031 0fff0018 00000008
[ 2.910681] 00000020: 00000003 9fff0040 0fff0020 00000008
[ 2.915988] 00000030: 00000103 9fff00c5 0fff0063 00000008
[ 2.921296] 00000040: 00000b00 9fff0270 0fff0138 00000008
[ 2.926602] 00000050: 00005111 00000000 00000000 00000000
[ 2.931910] 00000060: 00004031 0000b108 00000020 00000200
[ 2.937217] 00000070: 00008300 00008200 00008342 00010014
[ 2.942524] 00000080: 00010014 00010014 0000a101 0000277d
[ 2.947831] 00000090: 00004280 00008a00 00000200 00000200
[ 2.953139] 000000a0: 00000200 0bb8ea60 00010014 00010014
[ 2.958446] 000000b0: 00010014 00000900 00000900 001f05dc
[ 2.963754] 000000c0: 00001703 00000707 00000e40 00000400
[ 2.969060] 000000d0: 00000342 00000742 00004141 00000000
[ 2.974368] 000000e0: 00004141 00000505 00008042 00008f8f
[ 2.979675] 000000f0: 00000000 00000631 00001ee5 00008307
[ 2.984982] 00000100: 00001200 00010014 00004141 00000000
[ 2.990289] 00000110: 00000000 00000000 00000000 00000000
[ 2.995595] 00000120: 00000000 00000000 00000000 00000000
[ 3.000901] 00000130: 00000000 00000000 00000000 00000000
[ 3.006208] 00000140: 00000000 00000000 00000000 00000000
[ 3.011515] 00000150: 00000000 00000000 00000000 00000000
[ 3.016821] 00000160: 00000000 00000000 00000000 00000000
[ 3.022128] 00000170: 00000000 00000000 0000e000 00000000
[ 3.027434] 00000180: 00000000 00000000 0000000c 00000000
[ 3.032741] 00000190: 00000000 00000000 00000000 00000000
[ 3.038047] 000001a0: 00000000 00000000 00000000 00000000
[ 3.043354] 000001b0: 00000000 00000000 00000000 00000000
[ 3.048660] 000001c0: 00000000 00000000 00000000 00000000
[ 3.053967] 000001d0: 00000000 00000000 00000000 00000000
[ 3.059274] 000001e0: 00000000 00000000 00000000 00640064
[ 3.064580] 000001f0: 00000004 00000000 00000002 00000000
[ 3.069887] 00000200: 00000002 00000000 00000002 00000000
[ 3.075193] 00000210: 00000002 00000000 00000004 00000000
[ 3.080498] Rebooting in 5 seconds..
#使用编译后的resource镜像以及内核镜像，uboot

o徘徊o · 发表于 2018-10-9 13:28:55

<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x500
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (ljy@ljy-ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #457 SMP PREEMPT Tue Apr 5 13:47:24 CST 2016
[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[ 0.000000] rockchip_uboot_logo_setup: mem: 2000000@7dc00000, offset:0
[ 0.000000] rockchip_uboot_mem_reserve: reserve 2000000@7dc00000 for uboot logo
[ 0.000000] rockchip_ion_reserve
[ 0.000000] ion heap(carveout): base(0) size(0) align(0)
[ 0.000000] ion heap(drm): base(0) size(28000000) align(0)
[ 0.000000] rockchip_ion_populate_heap: Unable to populate heap, error: -22
[ 0.000000] ion heap((null)): base(0) size(0) align(0)
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at mm/memblock.c:775 memblock_alloc_base_nid+0x24/0x70()
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0 #457
[ 0.000000] [<c0013e24>] (unwind_backtrace+0x0/0xe0) from [<c001172c>] (show_stack+0x10/0x14)
[ 0.000000] [<c001172c>] (show_stack+0x10/0x14) from [<c00338d8>] (warn_slowpath_common+0x4c/0x68)
[ 0.000000] [<c00338d8>] (warn_slowpath_common+0x4c/0x68) from [<c003390c>] (warn_slowpath_null+0x18/0x1c)
[ 0.000000] [<c003390c>] (warn_slowpath_null+0x18/0x1c) from [<c0af8dc0>] (memblock_alloc_base_nid+0x24/0x70)
[ 0.000000] [<c0af8dc0>] (memblock_alloc_base_nid+0x24/0x70) from [<c0af8e30>] (memblock_alloc_base+0x10/0x34)
[ 0.000000] [<c0af8e30>] (memblock_alloc_base+0x10/0x34) from [<c0b13344>] (ion_reserve+0xc0/0x160)
[ 0.000000] [<c0b13344>] (ion_reserve+0xc0/0x160) from [<c0ae8db8>] (arm_memblock_init+0x104/0x16c)
[ 0.000000] [<c0ae8db8>] (arm_memblock_init+0x104/0x16c) from [<c0ae7144>] (setup_arch+0xd0/0x1a4)
[ 0.000000] [<c0ae7144>] (setup_arch+0xd0/0x1a4) from [<c0ae4860>] (start_kernel+0x78/0x2d0)
[ 0.000000] [<c0ae4860>] (start_kernel+0x78/0x2d0) from [<00008074>] (0x8074)
[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.000000] ion_reserve: drm reserved base 55c00000 size 671088640
[ 0.000000] cma: CMA: reserved 16 MiB at 1f000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1d7a000 s14016 r8192 d14656 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523264
[ 0.000000] Kernel command line: vmalloc=496M console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 noinitrd root=/dev/mmcblk0p10 rw rootfstype=ext4 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(linuxroot) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2016-02-19_17:53:13

o徘徊o · 发表于 2018-10-9 13:30:03

[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 1341628k/1341628k available, 755524k reserved, 884736K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000]    vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000]    fixmap  : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000]    vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000]    lowmem  : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000]    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000]    modules : 0xbf000000 - 0xbfe00000 (  14 MB)
[ 0.000000]    .text : 0xc0008000 - 0xc0ae3358 (11117 kB)
[ 0.000000]    .init : 0xc0ae4000 - 0xc0b3d6c0 ( 358 kB)
[ 0.000000]    .data : 0xc0b3e000 - 0xc0c291b8 ( 941 kB)
[ 0.000000]       .bss : 0xc0c291b8 - 0xc0d44a3c (1135 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[ 0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
[ 0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
[ 0.000000] rkclk_init_clks: cnt_parent = 7
[ 0.000000] rkclk_init_clks: cnt_rate = 28
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 3
[ 0.000000] channel:0, lkg:6
[ 0.000000] target-temp:80
[ 0.000000] channel:2, lkg:0
[ 0.000000] target-temp:80
[ 0.000000] channel:0, lkg:6
[ 0.000000] target-temp:80
[ 0.000000] channel:1, lkg:6
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.344929] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.344944] pid_max: default: 32768 minimum: 301
[ 0.345056] Security Framework initialized
[ 0.345073] SELinux:  Initializing.
[ 0.345135] Mount-cache hash table entries: 512
[ 0.345770] Initializing cgroup subsys debug
[ 0.345783] Initializing cgroup subsys memory
[ 0.345810] Initializing cgroup subsys freezer
[ 0.345837] CPU: Testing write buffer coherency: ok
[ 0.346146] /cpus/cpu@0 missing clock-frequency property
[ 0.346159] /cpus/cpu@1 missing clock-frequency property
[ 0.346169] /cpus/cpu@2 missing clock-frequency property
[ 0.346178] /cpus/cpu@3 missing clock-frequency property
[ 0.346223] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[ 0.346274] Setting up static identity map for 0xc07def28 - 0xc07def80
[ 0.348542] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x1dc7 (version 3.0)
[ 0.423172] CPU1: Booted secondary processor
[ 0.423204] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[ 0.442848] CPU2: Booted secondary processor
[ 0.442872] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[ 0.462562] CPU3: Booted secondary processor
[ 0.462586] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[ 0.462688] Brought up 4 CPUs
[ 0.462716] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.462725] CPU: All CPU(s) started in SVC mode.
[ 0.463443] devtmpfs: initialized
[ 0.468565] pinctrl core: initialized pinctrl subsystem
[ 0.468815] regulator-dummy: no parameters
[ 0.469321] NET: Registered protocol family 16
[ 0.471008] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.471258] ion_snapshot: 0x1e9b0000 map to 0xe0907000 and copy to 0xc0d20004 (version 0.1)
[ 0.471592] Registered FIQ tty driver
[ 0.472982] console [ttyFIQ0] enabled
[ 0.473181] Registered fiq debugger ttyFIQ0
[ 0.473825] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[ 0.473849] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[ 0.473870] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[ 0.473889] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b

o徘徊o · 发表于 2018-10-9 13:31:12

[ 0.473981] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[ 0.474048] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[ 0.474112] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[ 0.474176] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[ 0.474241] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[ 0.474306] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[ 0.474372] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[ 0.474438] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[ 0.474509] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[ 0.474580] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[ 0.474596] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[ 0.474611] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[ 0.474625] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[ 0.475131] rockchip_interrupts_register:bank_num=7
[ 0.477071] rockchip_pinctrl_probe:init ok
[ 0.483393] rk_iommu ff900800.iep_mmu: (iep) Enter
[ 0.483482] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.483499] rk_iommu ff900800.iep_mmu: (iep) Initialized
[ 0.483671] rk_iommu ff950800.vip_mmu: (vip) Enter
[ 0.483738] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.483754] rk_iommu ff950800.vip_mmu: (vip) Initialized
[ 0.483911] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[ 0.483987] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.484002] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[ 0.484162] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[ 0.484230] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.484245] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[ 0.484429] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[ 0.484505] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.484521] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[ 0.484689] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[ 0.484761] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.484776] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[ 0.484943] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[ 0.485013] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.485028] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[ 0.486556] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.486572] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.486779] DDR DEBUG: version 1.00 20140603
[ 0.486811] DDR DEBUG: Channel a:
[ 0.486821] DDR DEBUG: DDR3 Device
[ 0.486836] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ 0.486849] DDR DEBUG: Channel b:
[ 0.486857] DDR DEBUG: DDR3 Device
[ 0.486871] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ 0.486884] DDR DEBUG: addr=0xc31000
[ 0.486895] DDR DEBUG: stride=9, size=256, halfcap=40000000
[ 0.486906] DDR DEBUG: socAddr[0]=0xc31000, socAddr[1]=0xc31100
[ 0.486917] DDR DEBUG: chAddr[0]=0xc31000, chAddr[1]=0xc31000
[ 0.486931] DDR DEBUG: dtar[0]=0x10186000, dtar[1]=0x10186000
[ 0.487178] DDR DEBUG: init success!!! freq=300MHz
[ 0.487188] DDR DEBUG: Channel a:
[ 0.487202] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487218] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487235] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487251] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487267] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.487279] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.487290] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.487300] DDR DEBUG: Channel b:
[ 0.487313] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487329] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487345] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487361] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[ 0.487375] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.487387] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.487398] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.509152] bio: create slab <bio-0> at 0
[ 0.510689] SCSI subsystem initialized
[ 0.510839] usbcore: registered new interface driver usbfs
[ 0.510886] usbcore: registered new interface driver hub
[ 0.510970] usbcore: registered new device driver usb
[ 0.512414] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[ 0.513384] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[ 0.513993] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[ 0.514419] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[ 0.514657] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter

o徘徊o · 发表于 2018-10-9 13:32:30

[ 0.515303] media: Linux media interface: v0.10
[ 0.515346] Linux video capture interface: v2.00
[ 0.515391] pps_core: LinuxPPS API ver. 1 registered
[ 0.515403] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.515432] PTP clock support registered
[ 0.515487] i2c-core: driver [bq24296] using legacy suspend method
[ 0.515500] i2c-core: driver [bq24296] using legacy resume method
[ 0.516119] ion_carveout_heap_create: 0@0
[ 0.516218] ion_drm_heap_create: 28000000@55c00000
[ 0.612644] rk_battery_charger_detect_cb , battery_charger_detect 1
[ 1.502455] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 1.719507] pgd = c0004000
[ 1.722170] [00000000] *pgd=00000000
[ 1.725700] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1.730920] Modules linked in:
[ 1.733937] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G       W 3.10.0 #457
[ 1.740864] task: de890000 ti: de872000 task.ti: de872000
[ 1.746178] PC is at strlen+0xc/0x20
[ 1.749696] LR is at __create_file+0x50/0x168
[ 1.753981] pc : [<c027a0e4>] lr : [<c021eda0>] psr: 60000113
[ 1.753981] sp : de873d40  ip : 0000001b  fp : 00000000
[ 1.765260] r10: c0d0be98  r9 : deb5a600  r8 : deb0e880
[ 1.770395] r7 : 000001b4  r6 : 00000000  r5 : de43e880  r4 : 00000000
[ 1.776809] r3 : 00000001  r2 : 00000000  r1 : a0000113  r0 : 00000000
[ 1.783226] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[ 1.790409] Control: 10c5387d  Table: 0000406a  DAC: 00000015

绣恩沐 · 发表于 2020-9-27 20:38:41

共同发展！学习才会进步，谢了

http://www.topzhuli.com
http://www.topziliao.com
http://www.topzisha.com
http://www.topzishahu.com
http://www.topzn.com
http://www.topzongcai.com
http://www.topzuanshi.com

x3288V4.0内核启动不起来

RE: x3288V4.0内核启动不起来