九鼎创展论坛中文版English
登录 | 立即注册 设为首页收藏本站 切换到宽版
查看: 4825|回复: 2
打印 上一主题 下一主题

请教版主,X210核心板烧录WINCE问题

[复制链接]
跳转到指定楼层
楼主
发表于 2017-9-25 12:00:58 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
新的X210核心板,使用DNW连接核心板,下载x210_usb.bin,再下载EBOOT.bin。等到开始倒计时,按空格,按U,使用UBOOT,下载9tripod_boot.nb0,然后重启开机启动方式选择INAND。
结果DNW显示如下:(没有倒计时,一直卡着不动)

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Nov 13 2012 17:02:48
Microsoft Windows CE Bootloader for the Samsung SMDKV210 Version 2.5 Built Jun  6 2013

ARGS: Initializing BSP_ARGS back to initial state.
Initialize IRQ Vector Tables
EOTG: USB DeInit 0xE59FF3D8
[SDMMC:INF] This MMC is made on SPEC 4.2
[SDMMC:INF] This MMC is made on SPEC 4.2
[SDMMC:INF] SDHC_GET_EXTCSD() This MMC is Spec 4.2 , Total sector 7733248
[SDMMC:INF] SDHC_GET_EXTCSD() Card Type 0x7
[SDMMC:INF] SDHC_CONFIG_CLK() Card Working Frequency = 24MHz
[SDMMC:INF] SDHC_CONFIG_CLK() Set MMC High speed mode OK!!
[SDMMC:INF] SDHC_SET_BUS_WIDTH() 4Bit Data Bus enables
SDHC_INIT!!!  g_dwIsSDSPEC20 : 0,g_dwMMCSpec42:1,g_dwIsMMC:1
HSMMC_Init Success!!!
BP_Init++
BP_Init] pMemory=0xa7600000
BP_Init] g_pbMBRSector=0xa7600000
BP_Init] g_pbBlock=0xa7600200
BP_Init] g_pSectorInfoBuf=0xa7610200
BP_Init--
TOC_Read: 17
### HSMMC::READTOC MMC from 0xa31 to 0x8 0x878442c0
[SUN] g_ImageType: 0x8
TOC {
dwSignature: 0x434F544E
BootCfg
{
  ConfigFlags: 0x2020
  dwBootDelay: 0x5
  IP: 0.0.0.0
  MAC Address: 00:00:00:00:00:00
  Port: 0.0.0.0
  SubnetMask: 255.255.255.0
}
ID[0]
{
  dwVersion: 0x20005
  dwSignature: 0x544F4245
  String: eboot.bin
  dwImageType: 0x1
  dwTtlSectors: 0x400
  dwLoadAddress: 0x87700000
  dwJumpAddress: 0x87700000
  dwStoreOffset: 0x1
}
ID[1]
{
  dwVersion: 0x0
  dwSignature: 0x0
  String:
  dwImageType: 0x0
  dwTtlSectors: 0x0
  dwLoadAddress: 0x0
  dwJumpAddress: 0x0
  dwStoreOffset: 0x0
}
ID[2]
{
  dwVersion: 0x0
  dwSignature: 0x52435342
  String: BOOTIMAG
  dwImageType: 0x4
  dwTtlSectors: 0xA20
  dwLoadAddress: 0xA0020000
  dwJumpAddress: 0xA0020000
  dwStoreOffset: 0x1
}
ID[3]
{
  dwVersion: 0x1
  dwSignature: 0x48534643
  String: NK
  dwImageType: 0x8
  dwTtlSectors: 0x18560
  dwLoadAddress: 0x80020000
  dwJumpAddress: 0x80027D5C
  dwStoreOffset: 0x0
}
ID[4]
{
  dwVersion: 0x0
  dwSignature: 0x0
  String:
  dwImageType: 0x0
  dwTtlSectors: 0x0
  dwLoadAddress: 0x0
  dwJumpAddress: 0x0
  dwStoreOffset: 0x0
}(卡在这里不动)


请教版主,这是什么情况。
回复

使用道具 举报

沙发
发表于 2020-10-12 15:19:41 | 只看该作者
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|深圳市九鼎创展科技官方论坛 ( 粤ICP备11028681号-2  

GMT+8, 2024-4-25 10:23 , Processed in 0.018528 second(s), 18 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表