|
|
还是PING不通，PING自己也不通
dmesg
查看部分信息如下：
[ 2.174000] nxp_v4l2_probe success!!!
[ 2.175000] nxp_hdmi_cec_probe success
[ 2.176000] usbcore: registered new interface driver uvcvideo
[ 2.177000] USB Video Class driver (1.1.1)
[ 2.178000] mma8653_hw_init:addr = 0x1d, Read ID value is :90
[ 2.180000] input: mma8653 as /devices/virtual/input/input4
[ 2.182000] i2c-core: driver [mma8653] using legacy suspend method
[ 2.183000] i2c-core: driver [mma8653] using legacy resume method
[ 2.184000] nxp_wdt: NXP Watchdog Timer, (c) 2014 SLsiAP
[ 2.188000] nxp-wdt nxp-wdt: watchdog inactive, reset disabled, irq disabled
[ 2.190000] device-mapper: uevent: version 1.0.3
[ 2.191000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.193000] usbcore: registered new interface driver btusb
[ 2.198000] DVFS: cpu DVFS with PLL.1 [tables=11]
[ 2.199000] cpuidle: using governor ladder
[ 2.200000] cpuidle: using governor menu
[ 2.201000] Synopsys Designware Multimedia Card Interface Driver
[ 2.202000] dw_mmc dw_mmc.2: Using internal DMA controller.
[ 2.203000] mmc0: no vmmc regulator found
[ 2.206000] dw_mmc dw_mmc.2: Version ID is 250a
[ 2.207000] dw_mmc dw_mmc.2: DW MMC controller at irq 77, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 2.208000] dw_mmc dw_mmc.0: Using internal DMA controller.
[ 2.210000] mmc1: no vmmc regulator found
[ 2.211000] dw_mmc dw_mmc.0: Using external card detect irq 267 (io 161)
[ 2.214000] dw_mmc dw_mmc.0: Version ID is 250a
[ 2.215000] dw_mmc dw_mmc.0: DW MMC controller at irq 75, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 2.216000] dw_mmc dw_mmc.1: Using internal DMA controller.
[ 2.217000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.218000] mmc2: no vmmc regulator found
[ 2.219000] dw_mmc dw_mmc.1: Using external card detect irq 163 (io 57)
[ 2.222000] dw_mmc dw_mmc.1: Version ID is 250a
[ 2.223000] dw_mmc dw_mmc.1: DW MMC controller at irq 76, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 2.224000] Registered led device: led1
[ 2.224000] Registered led device: led2
[ 2.224000] Registered led device: led3
[ 2.224000] Registered led device: led4
[ 2.227000] usbcore: registered new interface driver usbhid
[ 2.229000] mmc_host mmc0: device is being hw reset
[ 2.230000] usbhid: USB HID core driver
[ 2.231000] gsensor calibration file not exist!
[ 2.233000] ADC: CHs 4, 200000(1000000 ~ 130208) sample rate, polling mode, scale=166(bit 6)
[ 2.235000] ashmem: initialized
[ 2.236000] logger: created 256K log 'log_main'
[ 2.237000] logger: created 256K log 'log_events'
[ 2.239000] logger: created 256K log 'log_radio'
[ 2.240000] logger: created 256K log 'log_system'
[ 2.241000] alc5623_i2c_probe ............
[ 2.242000] snd pcm: register sound platform 'nxp-pcm'
[ 2.244000] snd i2s: ch 0, master, iis mode, 48000(47607)hz, 32 FBITs, MCLK=12187500hz, RFS=256
[ 2.245000] alc5623_probe ............
[ 2.278000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.280000] mmc0: new high speed MMC card at address 0001
[ 2.281000] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 2.282000] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 2.284000] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 2.287000] mmcblk0: p1 p2
[ 2.291000] mmcblk0boot1: unknown partition table
[ 2.294000] mmcblk0boot0: unknown partition table
[ 2.300000] alc5623_jack_status_check: hp jack OUT
[ 2.301000] Done: alc5623_dai_init register audio jack detect, 59
[ 2.302000] asoc: alc5621-hifi <-> nxp-i2s.0 mapping ok
[ 2.304000] input: I2S-alc5623 Headphone Jack as /devices/platform/alc5623-audio.0/sound/card0/input5
[ 2.305000] alc5623-dai: register card alc5621-hifi -> nxp-i2s.0
[ 2.306000] mmc_host mmc2: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
[ 2.307000] spdif-tx: 48000(47607)Hz, MCLK=12187500hz HDMI out
[ 2.310000] asoc: dit-hifi <-> nxp-spdif-tx mapping ok
[ 2.311000] GACT probability NOT on
[ 2.312000] Mirror/redirect action on
[ 2.313000] u32 classifier
[ 2.314000] Actions configured
[ 2.315000] Netfilter messages via NETLINK v0.30.
[ 2.316000] nf_conntrack version 0.5.0 (12932 buckets, 51728 max)
[ 2.317000] ctnetlink v0.93: registering with nfnetlink.
[ 2.318000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.319000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.320000] xt_time: kernel timezone is -0000
[ 2.321000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.322000] arp_tables: (C) 2002 David S. Miller
[ 2.323000] TCP: cubic registered
[ 2.324000] Initializing XFRM netlink socket
[ 2.326000] NET: Registered protocol family 10
[ 2.328000] Mobile IPv6
[ 2.329000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.330000] IPv6 over IPv4 tunneling driver
[ 2.332000] NET: Registered protocol family 17
[ 2.333000] NET: Registered protocol family 15
[ 2.334000] Bluetooth: RFCOMM TTY layer initialized
[ 2.336000] Bluetooth: RFCOMM socket layer initialized
[ 2.337000] Bluetooth: RFCOMM ver 1.11
[ 2.338000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.339000] Bluetooth: BNEP filters: protocol multicast
[ 2.340000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.341000] NET: Registered protocol family 35
[ 2.342000] Registering the dns_resolver key type
[ 2.343000] Registering SWP/SWPB emulation handler
[ 2.347000] axp22_dcdc5: incomplete constraints, leaving on
[ 2.349000] axp22_dcdc4: incomplete constraints, leaving on
[ 2.351000] axp22_dcdc3: incomplete constraints, leaving on
[ 2.353000] axp22_dcdc2: incomplete constraints, leaving on
[ 2.355000] axp22_dcdc1: incomplete constraints, leaving on
[ 2.360000] axp22_eldo2: incomplete constraints, leaving on
[ 2.362000] axp22_eldo1: incomplete constraints, leaving on
[ 2.366000] axp22_dldo2: incomplete constraints, leaving on
[ 2.367000] mmc_host mmc2: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.368000] mmc2: new high speed SDHC card at address 0001
[ 2.371000] axp22_dldo1: incomplete constraints, leaving on
[ 2.373000] mmcblk1: mmc2:0001 SD16G 7.43 GiB
[ 2.375000] axp22_aldo3: incomplete constraints, leaving on
[ 2.376000] mmcblk1: p1
[ 2.379000] axp22_aldo2: incomplete constraints, leaving on
[ 2.381000] axp22_aldo1: incomplete constraints, leaving on
[ 2.384000] otg_wakelock_init: No USB transceiver found
[ 2.385000] nxp-rtc nxp-rtc.0: setting system clock to 2015-01-01 01:22:17 UTC (1420075337)
[ 2.387000] tmu[0] = trim 45:0, ret 1
[ 2.388000] TMU: register tmu.0 to hwmon (max 1400000khz)
[ 2.389000] ALSA device list:
[ 2.390000] #0: I2S-alc5623
[ 2.391000] #1: SPDIF-Transciever
[ 2.394000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
[ 2.398000] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 2.447000] EXT4-fs (mmcblk0p2): recovery complete
[ 2.448000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.449000] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.450000] devtmpfs: mounted
[ 2.451000] Freeing init memory: 240K
[ 2.452000] Write protecting the kernel text section c0008000 - c09b0000
[ 2.454000] rodata_test: attempting to write to read-only section:
[ 2.455000] write to read-only section trapped, success
[ 2.560000] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[ 2.652000] udevd[93]: starting version 3.0
[ 3.125000] ------------[ cut here ]------------
[ 3.125000] WARNING: at kernel/irq/manage.c:1196 __free_irq+0x98/0x1b8()
[ 3.125000] Trying to free already-free IRQ 51
[ 3.125000] Modules linked in:
[ 3.125000] [<c0014e80>] (unwind_backtrace+0x0/0x138) from [<c0042814>] (warn_slowpath_common+0x4c/0x64)
[ 3.125000] [<c0042814>] (warn_slowpath_common+0x4c/0x64) from [<c00428c0>] (warn_slowpath_fmt+0x30/0x40)
[ 3.125000] [<c00428c0>] (warn_slowpath_fmt+0x30/0x40) from [<c00b3058>] (__free_irq+0x98/0x1b8)
[ 3.125000] [<c00b3058>] (__free_irq+0x98/0x1b8) from [<c00b31c4>] (free_irq+0x4c/0xa0)
[ 3.125000] [<c00b31c4>] (free_irq+0x4c/0xa0) from [<c04a67c8>] (_hw_cleanup+0x10/0x40)
[ 3.125000] [<c04a67c8>] (_hw_cleanup+0x10/0x40) from [<c04a77f4>] (nxp_scaler_s_power+0x28/0x120)
[ 3.125000] [<c04a77f4>] (nxp_scaler_s_power+0x28/0x120) from [<c04a645c>] (nxp_scaler_close+0x30/0x48)
[ 3.125000] [<c04a645c>] (nxp_scaler_close+0x30/0x48) from [<c0412628>] (subdev_close+0x3c/0x8c)
[ 3.125000] [<c0412628>] (subdev_close+0x3c/0x8c) from [<c04069bc>] (v4l2_release+0x50/0x74)
[ 3.125000] [<c04069bc>] (v4l2_release+0x50/0x74) from [<c011e79c>] (fput+0xcc/0x248)
[ 3.125000] [<c011e79c>] (fput+0xcc/0x248) from [<c011ad08>] (filp_close+0x58/0x7c)
[ 3.125000] [<c011ad08>] (filp_close+0x58/0x7c) from [<c011b4e0>] (sys_close+0xb0/0xe4)
[ 3.125000] [<c011b4e0>] (sys_close+0xb0/0xe4) from [<c000ec80>] (ret_fast_syscall+0x0/0x30)
[ 3.125000] ---[ end trace acab1c1dca2c851d ]---
[ 3.176000] HDMI HPD State 0x0
[ 3.288000] nxp-wdt nxp-wdt: timeout 60 invalid value
[ 233.618000] eth0: device MAC address 22:71:66:b0:00:74
[ 233.619000] yt8511_config_init succeed.
[ 233.635000] stmmac_open: failed PTP initialisation
[ 243.922000] eth0: no IPv6 routers present
[root@tarena:~]#
[root@tarena:~]# |
|
|手机版|小黑屋|深圳市九鼎创展科技官方论坛
( 粤ICP备11028681号-2 ) 
发表于 2022-12-5 09:53:08
收藏
转播
分享
淘帖
支持
反对
发表于 2022-12-5 09:59:51
楼主
ink
