九鼎创展论坛

标题: x4412 开发板不支持320x240？ [打印本页]

作者: Leo 时间: 2015-3-13 09:06
标题: x4412 开发板不支持320x240？
使用x4412_jlb_rtm_v10.tar.bz2，改写x4412-lcds.c，增加对320x240 LCD支持  重新编译内核，同一内核可以正常支持高清和标清的LCD，但是使用320x240 时不能启动，启动过程如下：

OK

U-Boot 2010.12-00000-ga360573 (Jan 22 2015 - 20:22:22) for SMDK4412

CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
APLL = 1500MHz, MPLL = 800MHz
DRAM:  1023 MiB
TrustZone Enabled BSP
BL1 versiMode ... EMMC4.41
REVISION: 1.1
NAME: S5P_MSHC4
MMC Device 0: 3776 MB
MMC Device 1: 0 MB
MMC Device 2 not found
Net: No ethernet found.
Hit any key to stop autoboot:  0
reading kernel..device 0 Start 1063, Count 24576
MMC read: dev # 0, block # 1063, count 24576 ... 24576 blocks read: OK
completed
reading RFS..device 0 Count 25639, Start 8192
MMC read: dev # 0, block # 25639, count 8192 ... 8192 blocks read: OK
completed
do_sdfuse:MMC init is failed.
Boot with zImage
## Loading init Ramdisk from Legacy Image at 41000000 ...
Image Name: ramdisk
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 184613 Bytes = 184613 Load Address: 41000000
Entry Point:  41000000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

欢迎光临九鼎创展论坛 (http://bbs.9tripod.com/)