|
本帖最后由 congbupt 于 2014-3-4 10:48 编辑
从eMMC(iNand 4GB)启动Android 4.0.4,板子一直停留在ANDROID字样的界面。
在u-boot中使用fdisk分区的:
RAY210 # fdisk -c 0
fdisk is completed
partion # size(MB) block start # block count partition_Id
1 2996 1571856 6136284 0x0C
2 302 22671 619674 0x83
3 350 642345 717915 0x83
4 103 1360260 211596 0x83
对各个分区已经格式化了,格式化命令fatformat、ext3format。
使用mkimage制作ramdisk-uboot.img,make_ext4fs制作的system.img和userdata.img。
init.rc文件内容:
mount ext4 /dev/block/mmcblk0p2 /system
mount ext4 /dev/block/mmcblk0p2 /system ro wait remount
mount ext4 /dev/block/mmcblk0p3 /data wait nosuid nodev noatime
mount ext4 /dev/block/mmcblk0p4 /cache nosuid nodev noatime
串口信息:
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
Freeing init memory: 176K
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs error (device mmcblk0p3): ext4_mb_generate_buddy:736: group 1, 25600 blocks in bitmap, 32237 in gd
Aborting journal on device mmcblk0p3-8.
EXT4-fs (mmcblk0p3): Remounting filesystem read-only
EXT4-fs error (device mmcblk0p3) in ext4_reserve_inode_write:5641: Journal has aborted
EXT4-fs error (device mmcblk0p3) in ext4_evict_inode:215: Journal has aborted
rtusb init rt2870 --->
usbcore: registered new interface driver rt2870
EXT4-fs error (device mmcblk0p2): ext4_mb_generate_buddy:736: group 1, 25600 blocks in bitmap, 26728 in gd
Aborting journal on device mmcblk0p2-8.
EXT4-fs (mmcblk0p2): Remounting filesystem read-only
EXT4-fs error (device mmcblk0p2) in ext4_reserve_inode_write:5641: Journal has aborted
EXT4-fs error (device mmcblk0p2) in ext4_evict_inode:215: Journal has aborted
init: Unable to open persistent property directory /data/property errno: 2
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
adb_open
adb_bind_config
android_work: did not send uevent (0 0 (null))
/system/bin/sh: No controlling tty (open /dev/tty: No such device or address)
/system/bin/sh: warning: won't have full job control
PVR_KWarning): SysFinalise: Version string: SGX540 S5PC110 [543, drivers/gpu/pvr/s5pc110/sysconfig.c]
warning: `rild' uses 32-bit capabilities (legacy support in use)
root@android:/ # wm8960-codec 0-001a: Failed to issue reset
wm8960-codec 0-001a: asoc: failed to probe CODEC wm8960-codec.0-001a: -6
asoc: failed to instantiate card tq210_audio: -6
win->id=0, pmem_start=0x50989000
s3cfb s3cfb: [fb0] dma: 0x50989000, cpu: 0xf8800000, size: 0x00465000
s3cfb s3cfb: [fb1] dma: 0x4e000000, cpu: 0xffb00000, size: 0x002ee000
request_suspend_state: wakeup (3->0) at 5335262707 (2014-03-02 08:59:42.414075023 UTC)
init: untracked pid 2179 exited
init: untracked pid 2184 exited
request_suspend_state: wakeup (0->0) at 9111824947 (2014-03-02 08:59:46.190638013 UTC)
init: untracked pid 2230 exited
init: untracked pid 2229 exited
request_suspend_state: wakeup (0->0) at 13894569232 (2014-03-02 08:59:50.973382464 UTC)
init: untracked pid 2290 exited
init: untracked pid 2289 exited
到这里一直重复最后三行的打印信息。求助!!
|
|