x210ii core board (USB OTG problem)

GRAF · 发表于 2013-3-10 22:27:15

本帖最后由 GRAF 于 2013-3-11 00:04 编辑

I've bought x210ii board (main board board marked as X210BV3) from WaveShare. For some strange reasons USB_OTG stopped working and I can't program the board...
Core board marked as X210CV3. Where I can buy the core board separately?

armeasy · 发表于 2013-3-12 21:28:51

yes . you must set om[5:0]=001101 on inand board; or set om[5:0]=000011 on nand board.
you can buy the core board separately.

GRAF · 发表于 2013-3-13 03:26:56

armeasy, thanks.
Is there is a method which allow to flash uboot without USB? JTAG?

armeasy · 发表于 2013-3-13 15:33:05

yes,you can fuse image through SD card

GRAF · 发表于 2013-3-13 15:48:25

Yes, but before this I should make changes with uboot. Then I should flash this uboot into board. How can I flash uboot without USB?

armeasy · 发表于 2013-3-13 17:40:17

but before this I should make changes with uboot.

you can start uboot from sd card, and then update image from the sd card.

GRAF · 发表于 2013-3-13 19:39:48

Ok. How it should be done?