九鼎创展论坛中文版English
登录 | 立即注册 设为首页收藏本站 切换到宽版
查看: 6313|回复: 4
打印 上一主题 下一主题

x4418 android5.0系统编译在开发板上无法启动

[复制链接]
跳转到指定楼层
楼主
发表于 2017-7-11 16:47:21 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式
[    4.143000] mmc0: new high speed MMC card at address 0001
[    4.143000] mmcblk0: mmc0:0001 008GE0 7.28 GiB
[    4.143000] mmcblk0boot0: mmc0:0001 008GE0 partition 1 4.00 MiB
[    4.143000] mmcblk0boot1: mmc0:0001 008GE0 partition 2 4.00 MiB
[    4.145000]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[    4.147000]  mmcblk0boot1: unknown partition table
[    4.148000]  mmcblk0boot0: unknown partition table
[    4.196000] usbcore: registered new interface driver usbhid
[    4.202000] usbhid: USB HID core driver
[    4.206000] ADC: CHs 8, 200000(1000000 ~ 97656) sample rate, polling mode, scale=125(bit 6)
[    4.215000] ashmem: initialized
[    4.218000] logger: created 256K log 'log_main'
[    4.223000] logger: created 256K log 'log_events'
[    4.228000] logger: created 256K log 'log_radio'
[    4.233000] logger: created 256K log 'log_system'
[    4.238000] alc5623_i2c_probe ............
[    4.242000] snd pcm: register sound platform 'nxp-pcm'
[    4.248000] snd i2s: ch 0, master, iis mode, 48000(47607)hz, 32 FBITs, MCLK=12187500hz, RFS=256
[    4.257000] alc5623_probe ............
[    4.296000] level is 1, invert is 1
[    4.300000] alc5623_jack_status_check: hp jack OUT
[    4.305000] headphone plug out
[    4.308000] Done: alc5623_dai_init register audio jack detect, 59
[    4.315000] asoc: alc5621-hifi <-> nxp-i2s.0 mapping ok
[    4.321000] input: I2S-alc5623 Headphone Jack as /devices/platform/alc5623-audio.0/sound/card0/input5
[    4.331000] alc5623-dai: register card alc5621-hifi -> nxp-i2s.0
[    4.337000] spdif-tx: 48000(47607)Hz, MCLK=12187500hz HDMI out
[    4.344000] asoc: dit-hifi <-> nxp-spdif-tx mapping ok
[    4.349000] GACT probability NOT on
[    4.353000] Mirror/redirect action on
[    4.357000] u32 classifier
[    4.360000]     Actions configured
[    4.363000] Netfilter messages via NETLINK v0.30.
[    4.368000] nf_conntrack version 0.5.0 (12936 buckets, 51744 max)
[    4.374000] ctnetlink v0.93: registering with nfnetlink.
[    4.380000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    4.387000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    4.393000] xt_time: kernel timezone is -0000
[    4.398000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.403000] arp_tables: (C) 2002 David S. Miller
[    4.408000] TCP: cubic registered
[    4.411000] Initializing XFRM netlink socket
[    4.416000] NET: Registered protocol family 10
[    4.421000] Mobile IPv6
[    4.424000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.429000] IPv6 over IPv4 tunneling driver
[    4.434000] NET: Registered protocol family 17
[    4.439000] NET: Registered protocol family 15
[    4.443000] Bluetooth: RFCOMM TTY layer initialized
[    4.448000] Bluetooth: RFCOMM socket layer initialized
[    4.453000] Bluetooth: RFCOMM ver 1.11
[    4.457000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.463000] Bluetooth: BNEP filters: protocol multicast
[    4.468000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.474000] NET: Registered protocol family 35
[    4.479000] Registering the dns_resolver key type
[    4.484000] Registering SWP/SWPB emulation handler
[    4.491000] axp22_dcdc5: incomplete constraints, leaving on
[    4.497000] axp22_dcdc4: incomplete constraints, leaving on
[    4.503000] axp22_dcdc3: incomplete constraints, leaving on
[    4.509000] axp22_dcdc2: incomplete constraints, leaving on
[    4.515000] axp22_dcdc1: incomplete constraints, leaving on
[    4.523000] axp22_eldo2: incomplete constraints, leaving on
[    4.529000] axp22_eldo1: incomplete constraints, leaving on
[    4.536000] axp22_dldo2: incomplete constraints, leaving on
[    4.542000] axp22_dldo1: incomplete constraints, leaving on
[    4.549000] axp22_aldo3: incomplete constraints, leaving on
[    4.555000] axp22_aldo2: incomplete constraints, leaving on
[    4.561000] axp22_aldo1: incomplete constraints, leaving on
[    4.567000] otg_wakelock_init: No USB transceiver found
[    4.573000] nxp-rtc nxp-rtc.0: setting system clock to 2009-09-01 00:00:01 UTC (1251763201)
[    4.581000] TMU: register adc.2 to hwmon
[    4.585000] ALSA device list:
[    4.588000]   #0: I2S-alc5623
[    4.591000]   #1: SPDIF-Transciever
ÿ[    4.595000] Freeing init memory: 224K
[    4.599000] Write protecting the kernel text section c0008000 - c08b0000
[    4.606000] rodata_test: attempting to write to read-only section:
[    4.612000] write to read-only section trapped, success
[    4.713000] init: /dev/hw_random not found
ÿ[    4.741000] init: /dev/hw_random not found
[    4.767000] EXT4-fs (mmcblk0p2): recovery complete
[    4.772000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.780000] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.2/by-num/p2,target=/system,type=ext4)=0
[    4.806000] EXT4-fs (mmcblk0p3): recovery complete
[    4.812000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    4.822000] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.2/by-num/p3,/cache,ext4)=0
[    4.840000] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.2/by-num/p3
[    4.894000] HDMI HPD State 0x0
[    4.929000] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    4.934000] e2fsck: /dev/block/platform/dw_mmc.2/by-num/p3: clean, 11/27392 files, 3534/109568 blocks
[    4.954000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[    4.964000] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.2/by-num/p3,target=/cache,type=ext4)=0
[    5.017000] EXT4-fs (mmcblk0p7): recovery complete
[    5.023000] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    5.034000] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.2/by-num/p7,/data,ext4)=0
[    5.053000] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.2/by-num/p7
[    5.078000] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    5.083000] e2fsck: /dev/block/platform/dw_mmc.2/by-num/p7: clean, 73/366480 files, 49078/1464843 blocks
[    5.102000] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[    5.112000] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.2/by-num/p7,target=/data,type=ext4)=0
[    5.298000] setting PHY_BASEADDR_POWER_GATE, set 1
[    5.303000] setting PHY_BASEADDR_PMU_ISOLATE+4, set 0
[    5.308000] setting PHY_BASEADDR_PMU_ISOLATE+8, set 0
[    5.314000] setting PHY_BASEADDR_PMU_ISOLATE, set 1
[    5.320000] read PHY_BASEADDR_PMU_ISOLATE + 0xC
[    5.324000] Wait Power UP Ack(powerUpAck=0x00000000)
[    5.329000] setting ClockGen, set 1
[    5.333000] setting Reset VR addr(0xf0012008)
[    5.338000] setting PHY_BASEADDR_VR_PMU addr(0xf0072000)
[    5.344000] Vr: VR device driver loaded(ver1.2) for s5p4418
[    5.372000] binder: 115:115 transaction failed 29189, size 0-0
[    5.464000] rtk_btusb: Realtek Bluetooth USB driver module init, version 3.0
[    5.471000] rtk_btusb: Register usb char device interface for BT driver
[    5.478000] usbcore: registered new interface driver rtk_btusb
[    5.484000] rtk_btusb: btchr_open: BT usb char device is opening
[    5.490000] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    5.496000] rtk_btusb: btchr_open: BT usb char device is opening
[    5.502000] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    5.509000] rtk_btusb: btchr_open: BT usb char device is opening
[    5.509000] logd.auditd: start
[    5.518000] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    5.524000] rtk_btusb: btchr_open: BT usb char device is opening
[    5.530000] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
ÿ[    5.539000] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[    5.549000] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[    5.560000] android_usb: already disabled
[    5.567000] adb_open
[    5.570000] mtp_bind_config
[    5.572000] adb_bind_config
root@x4418:/ # [   11.259000] init: untracked pid 376 killed by signal 9
[   16.064000] init: untracked pid 502 killed by signal 9
[   24.400000] init: untracked pid 438 exited with status 0
[   25.947000] init: untracked pid 820 killed by signal 9
[   31.330000] init: untracked pid 795 exited with status 0
[   31.562000] init: untracked pid 909 killed by signal 9
[   36.128000] init: untracked pid 993 killed by signal 9

显示屏一直显示九鼎创展logo,上面是启动的全部log,请大神帮忙看看。膜拜!
回复

使用道具 举报

沙发
发表于 2017-7-11 17:37:38 | 只看该作者
[    5.567000] adb_open
[    5.570000] mtp_bind_config
[    5.572000] adb_bind_config   从这里看的话系统已经进入安卓系统了,untracked pid 502 killed by signal 9 报这个错误,我们也遇到过,发一个5.1的镜像你自己试试行不行。链接:http://pan.baidu.com/s/1o8htpOY 密码:r4ke
回复 支持 反对

使用道具 举报

板凳
 楼主| 发表于 2017-7-11 18:11:05 | 只看该作者
armeasy 发表于 2017-7-11 17:37
[    5.567000] adb_open
[    5.570000] mtp_bind_config
[    5.572000] adb_bind_config   从这里看的话 ...

这个镜像下载进去可以使用,那源码在哪里,我下载的x4418_lollipop_v1.0_161104这个文件编译后无法启动,你的这一版是那个文件文件编译的,能否提供操作方法或者源码下载地址。
回复 支持 反对

使用道具 举报

地板
 楼主| 发表于 2017-7-12 13:56:19 | 只看该作者
下载的镜像和编译的文件大小不一样。

file:///C:\Users\Administrator\Personal\Tencent Files\3107197705\Image\C2C\%FI`WU{0(X~)JA$AFX$5F~K.png

QQ图片20170712135801.png (20.42 KB, 下载次数: 424)

QQ图片20170712135801.png
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|深圳市九鼎创展科技官方论坛 ( 粤ICP备11028681号-2  

GMT+8, 2024-11-22 09:23 , Processed in 0.020369 second(s), 20 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表