gnash编译

armeasy

MX258平台：

第一步：下载并编译zlib [OK]

下载地址：http://www.dnaphp.com/downloads/server/linux/30-zlib-1-2-5-tar
版本：zlib-1.2.5.tar.gz

CC=arm-none-linux-gnueabi-gcc ./configure --prefix=/opt/local --shared
make
make install

编译成功，在/opt/local下将会生成以下两个文件：
/opt/local/include/zlib.h /opt/local/include/zconf.h


第二步：下载并编译libiconv-1.13 [OK]

./configure --prefix=/opt/local --host=arm-none-linux-gnueabi
make
make install

第三步：下载并编译安装gettext-0.17 [OK]

下载地址：http://download.chinaunix.net/do ... amp;ResourceID=3687
版本：gettext-0.16.1.tar.gz

./configure  --host=arm-none-linux-gnueabi --prefix=/opt/local
make
make install

编译成功，在/opt/local下生成四个目录：bin  include  lib  share


第四步：下载并编译glib2.21.0 [OK]

下载地址：www.pudn.com
版本：glib-2.22.2.zip

chmod 777 configure
NM=nm CC=arm-none-linux-gnueabi-gcc ./configure --build=i686-linux --host=arm-none-linux-gnueabi --prefix=/opt/local glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=yes ac_cv_func_posix_getgrgid_r=yes ac_cv_lib_rt_clock_gettime=no glib_cv_monotonic_clock=yes --libdir=/opt/local/lib --includedir=/opt/local/include
chmod 777 mkinstalldirs
make
make install

第五步：下载并编译libxml2-2.7.3 [OK]

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local
make
make install

第六步：安装check-0.9.6 [OK]

下载地址：http://download.chinaunix.net/do ... amp;ResourceID=1364
版本：check-0.9.6.tar.gz

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local
make
make install

第七步：安装SDL-1.2.13 [OK]

下载地址：http://download.chinaunix.net/do ... amp;ResourceID=9305
版本：SDL-1.2.13.tar.gz

./configure  --host=arm-none-linux-gnueabi --prefix=/opt/local --enable-video-x11=no --enable-video-photon=no --enable-video-carbon=no --enable-video-cocoa=no --enable-video-directfb=no --enable-video-ps2gs=no --enable-video-svga=no --enable-video-vgl=no --enable-video-wscons=no --enable-video-xbios=no --enable-video-gem=no --enable-video-opengl=no --enable-osmesa-shared=no  CFLAGS="-I/opt/local/include -I/opt/local/include/glib-2.0" LDFLAGS=-L/opt/local/lib --enable-esd=no --enable-pulseaudio=no --enable-arts=no --enable-nas=no --enable-diskaudio=no --enable-ipod=no --enable-altivec=no --enable-mintaudio=no --enable-esd-shared=no --enable-oss=no --enable-alsa=no
make
make install

第八步：安装libpng-1.2.35 [OK]

下载地址：http://sourceforge.net/projects/ ... oad?use_mirror=nchc
版本：libpng-1.2.35.tar.bz2

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local CFLAGS="-I/opt/local/include"  CPPFLAGS="-I/opt/local/include" LDFLAGS="-L/opt/local/lib"
make
make install

第九步：安装jpegsrc.v6b.tar.gz [OK]

./configure --prefix=/opt/local --enable-shared --enable-static
然后修改Makefile的gcc ,ar,ranlib，全改为arm-none-linux-gnueabi-*
在/opt/local目录新建目录：
mkdir -p man/man1
make
make install

如果事先没有建指定的目录，在make install时就会提示一些无法创建的错误，比如：
root@lqm:/opt/program/tools/jpeg-6b# make install
/usr/bin/install -c -m 644 jconfig.h /usr/local/arm/3.4.1/arm-linux/include/jconfig.h
/usr/bin/install: 无法创建普通文件“/usr/local/arm/3.4.1/arm-linux/include/jconfig.h”: 没有那个文件或目录
make: *** [install-headers] 错误 1

第十步：安装giflib-4.1.6 [OK]

下载地址：http://sourceforge.net/projects/ ... oad?use_mirror=nchc
版本：giflib-4.1.6.tar.bz2

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local
make
make install

第十一步：安装boost1.39.0 [OK]

下载地址：http://sourceforge.net/projects/ ... oad?use_mirror=nchc
版本：boost_1_39_0.tar.gz

A: 解压boost_1_39_0.tar.gz
B: cd boost_1_39_0
C: cp tools/build/v2/user-config.jam  ./
D: 修改user-config.jam  line 46 :
  # using gcc : 3.2 : g++-3.2 ;
  using gcc :  : arm-none-linux-gnueabi-gcc ;
E: bjam  --user-config=user-config.jam //编译整个boost

    提示没有安装bjam,
    apt-get install bjam

F: bjam  install --prefix=/opt/local/boost --user-config=user-config.jam


有问题？
bjam  install --prefix=/opt/local/boost --user-config=user-config.jam --toolset=gcc

第十二步：安装freetype-2.3.9 [OK]

下载地址：http://d.download.csdn.net/down/2055761/newticigam
版本：freetype-2.3.9.tar.bz2

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local  CFLAGS=-I/opt/local/include CXXFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib
make
make install

第十三步：安装agg-2.5 [OK]

下载地址：http://ishare.iask.sina.com.cn/f/15007707.html
版本： agg-2.5.tar.gz

尝试以下方法：
chmod +x autogen.sh
./autogen.sh
./configure --host=arm-none-linux-gnueabi --prefix=/opt/local --with-sdl-prefix=/opt/local --with-x=no  CFLAGS=-I/opt/local/include CXXFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib --enable-platform=SDL --enable-examples=no
make
make install
有问题，提示如下错误：
root@lqm:/opt/program/tools/agg-2.5# ./autogen.sh
./autogen.sh: line 6: aclocal：找不到命令
./autogen.sh: line 9: autoheader：找不到命令
./autogen.sh: line 12: autoconf：找不到命令
安装如下软件：
apt-get install automake
再./autogen.sh

再尝试下面的方法：
修改Makefile.in.Linux：

AGGLIBS= -lagg -lSDL
AGGCXXFLAGS = -O3 -I/opt/gnash/include/SDL -L/opt/gnash/lib
CXX = arm-linux-g++
C = arm-linux-gcc
#CXX = icc
LIB = arm-linux-ar cr

.PHONY : clean

make

第十四步：安装gstreamer-0.10.23 [OK]

下载地址：http://ftp.acc.umu.se/pub/gnome/sources/gstreamer/0.10/
版本：gstreamer-0.10.23.tar.bz2

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local --with-sdl-prefix=/opt/local --with-x=no  CFLAGS=-I/opt/local/include CXXFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib --enable-platform=SDL --enable-examples=no --with-pkg-config-path=/opt/local/lib/pkgconfig
make
make install

第十五步：安装fontconfig-2.6.0 [OK]

下载地址：http://www.pudn.com/downloads230 ... /detail1083608.html
版本：fontconfig-2.7.3.tar.gz

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local CFLAGS=-I/opt/local/include CXXFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib --with-arch=arm
make
make install

第十六步：安装curl-7.19.5 [OK]

下载地址：http://www.hackchina.com/dlpre.php?id=162075
版本：curl-7.19.5.tar.gz

./configure --host=arm-none-linux-gnueabi --prefix=/opt/local CFLAGS=-I/opt/local/include CXXFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib
make
make install

第十七步：安装libutf8-0.8.1 （可以不用？）

第十八步：安装gnash0.8.5 （必须）
版本：gnash-0.8.5.tar.bz2

./configure --host=arm-none-linux-gnueabi --enable-gui=fb --prefix=/opt/local --libdir=/opt/local/lib --includedir=/opt/local/include --with-jpeg-lib=/opt/local/lib --with-jpeg-incl=/opt/local/include --with-gif-incl=/opt/local/include --with-gif-lib=/opt/local/lib --with-gstreamer-lib=/opt/local/lib --with-gstreamer-incl=/opt/local/include/gstreamer-0.10 --with-sdl-lib=/opt/local/lib --with-sdl-incl=/opt/local/include/SDL --with-boost-incl=/opt/local/boost/include --with-boost-lib=/opt/local/boost/lib --with-agg-incl=/opt/local/include/agg2 --with-agg-lib=/opt/local/lib --with-png-incl=/opt/local/include --with-png-lib=/opt/local/lib CFLAGS="-O3 -D__GLIBC__ -I/opt/local/lib/glib-2.0/include -I/opt/local/include/glib-2.0 -I/opt/local/include -I/opt/local/include/libxml2" CXXFLAGS="-O3 -D__GLIBC__ -I/opt/local/lib/glib-2.0/include -I/opt/local/include/glib-2.0 -I/opt/local/include -I/opt/local/include/libxml2" --with-glib-incl=/opt/local/include/glib-2.0 --with-glib-lib=/opt/local/lib/ --disable-nls --disable-testsuite  --with-z-incl=/opt/local/include  --with-z-lib=/opt/local/lib --with-freetype-incl=/opt/local/include/freetype2 --with-freetype-lib=/opt/local/lib  --with-fontconfig-incl=/opt/local/include --with-fontconfig-lib=/opt/local/lib --with-curl-incl=/opt/local/include --with-curl-lib=/opt/local/lib --enable-debugger


./libbase/Makefile  line323 add: -lcurl
  JPEG_LIBS = -L/home/hzf1/rootfs/root/usr/local/lib -ljpeg -lcurl

$ make
$ make install

如果不加-lcurl，将会有如下错误提示：
/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/arm-none-linux-gnueabi/lib
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_share_cleanup'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_share_setopt'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_cleanup'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_easy_getinfo'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_easy_setopt'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_init'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_add_handle'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_global_cleanup'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_share_init'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_remove_handle'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_easy_strerror'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_easy_perform'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_easy_init'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_global_init'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_perform'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_slist_free_all'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_fdset'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_slist_append'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_info_read'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_share_strerror'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_easy_cleanup'
/opt/program/tools/gnash/gnash-0.8.5/libbase/.libs/libgnashbase.so: undefined reference to `curl_multi_strerror'
collect2: ld returned 1 exit status
make[2]: *** [gprocessor] 错误 1
make[2]:正在离开目录 `/opt/program/tools/gnash/gnash-0.8.5/utilities'
make[1]: *** [all-recursive] 错误 1
make[1]:正在离开目录 `/opt/program/tools/gnash/gnash-0.8.5'
make: *** [all] 错误 2
root@lqm:/opt/program/tools/gnash/gnash-0.8.5#