[Need Help] My board is not correct update uboot for inand. [SOLVED]

UmniK · 发表于 2013-2-25 12:02:20

本帖最后由 UmniK 于 2013-2-25 14:44 编辑

After I downloaded the file in the board uboot to address 0x23e00000 my board freezes on the message:

U-Boot 1.3.4-dirty (Nov 27 2012 - 10:49:09) for x210

CPU: S5PV210 @ 1000MHz (OK)

APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz

MPLL = 667MHz, EPLL = 96MHz

HclkDsys = 166MHz, PclkDsys = 83MHz

HclkPsys = 133MHz, PclkPsys = 66MHz

SCLKA2M = 200MHz

Serial = CLKUART

Board: X210

DRAM: 512 MB

Flash: 8 MB

SD / MMC: 3800MB

NAND: <---- This my board Crashed!!! I see White Screen to my board!!!

How do I solve this problem?

pls see my video report: ftp://guest:guest@178.22.51.254/x210ii_problem_inand.avi (34mb)

My board: "x210ii - 7 inch display"

SOLVED: Files in DVD for iNand version not correct! See post: http://bbs.9tripod.com/thread-23-1-1.html (question #18)
Thanks ARM!

ARM · 发表于 2013-2-25 13:57:28

In the uboot/include/x210_sd.h header file, mark the macro definition "config_nand", recompile uboot.