X3399 7.1源码如何适配10.1的屏幕 - 九鼎创展论坛

/*
* Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "x3399-baseboard.dtsi"
#include "rk3399-android.dtsi"
#include "rk3399-vop-clk-set.dtsi"
/ {
model = "9tripod RK3399 Development Board";
compatible = "rockchip,android", "9tripod,x3399-development-board", "rockchip,rk3399";
edp_panel: edp-panel {
compatible = "samsung,ltl101dl03", "panel-simple";
backlight = <&backlight>;
power-supply = <&vcc3v3_s0>;
enable-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
ports {
panel_in_edp: endpoint {
remote-endpoint = <&edp_out_panel>;
};
};
};
test-power {
status = "okay";
};
rt5651 {
status = "okay";
};
};
&backlight {
status = "okay";
};
&edp {
status = "okay";
ports {
edp_out: port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
edp_out_panel: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_in_edp>;
};
};
};
};
&edp_in_vopl {
status = "disabled";
};
&route_edp {
status = "okay";
};
/*
&mipi_dsi {
status = "okay";
panel {
compatible ="simple-panel-dsi";
reg = <0>;
backlight = <&backlight>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_VIDEO_SYNC_PULSE)>;
dsi,format = <MIPI_DSI_FMT_RGB888>;
dsi,lanes = <4>;
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <70000000>;
hactive = <1024>;
vactive = <600>;
hback-porch = <80>;
hfront-porch = <80>;
vback-porch = <20>;
vfront-porch = <12>;
hsync-len = <2>;
vsync-len = <3>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
};
};
&mipi_in_vopl {
status = "disabled";
};
&route_mipi {
status = "okay";
};
*/
&cdn_dp {
status = "okay";
extcon = <&fusb0>;
phys = <&tcphy0_dp>;
};
&dp_in_vopb {
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_in_vopb {
status = "disabled";
};
&hdmi_sound {
status = "okay";
};
&i2s2 {
status = "okay";
};
&i2c1 {
status = "okay";
gt9xx: gt9xx@14 {
compatible = "goodix,gt9xx";
reg = <0x14>;
touch-gpio = <&gpio1 20 IRQ_TYPE_EDGE_RISING>;
reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
max-x = <2560>;
max-y = <1600>;
tp-size = <101>;
};
/*
gslx680@40 {
compatible = "9tripod,gslx680";
reg = <0x40>;
touch-gpio = <&gpio1 20 IRQ_TYPE_EDGE_RISING>;
reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
max-x = <1024>;
max-y = <600>; */
};
};
&pwm3 {
status = "okay";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>;
compatible = "rockchip,remotectl-pwm";
remote_pwm_id = <3>;
handle_cpu_id = <0>;
ir_key0 {
rockchip,usercode = <0xff40>;
rockchip,key_table =
<0xb2 KEY_POWER>,
<0xe5 KEY_HOME>,
<0xbd KEY_BACK>,
<0xba KEY_MENU>,
<0xf4 KEY_UP>,
<0xf1 KEY_DOWN>,
<0xef KEY_LEFT>,
<0xee KEY_RIGHT>,
<0xf2 KEY_ENTER>,
<0xf0 KEY_REPLY>,
<0xea KEY_VOLUMEUP>,
<0xe3 KEY_VOLUMEDOWN>,
<0xbc KEY_MUTE>,
<0xfe KEY_1>,
<0xfd KEY_2>,
<0xfc KEY_3>,
<0xfb KEY_4>,
<0xfa KEY_5>,
<0xf9 KEY_6>,
<0xf8 KEY_7>,
<0xf7 KEY_8>,
<0xb6 KEY_9>,
<0xff KEY_0>,
<0xed KEY_BACKSPACE>,
<0xaf KEY_POWER>,
<0x8b KEY_VOLUMEUP>,
<0xb9 KEY_VOLUMEDOWN>;
};
};
&vopb {
assigned-clocks = <&cru DCLK_VOP0_DIV>;
assigned-clock-parents = <&cru PLL_CPLL>;
};
&vopl {
assigned-clocks = <&cru DCLK_VOP1_DIV>;
assigned-clock-parents = <&cru PLL_VPLL>;
};
&isp0 {
status = "okay";
};
&isp1 {
status = "okay";
};
&isp0_mmu {
status = "okay";
};
&isp1_mmu {
status = "okay";
};
&pinctrl {
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};

复制代码