九鼎创展论坛
标题:
x3288CV4.1核心板烧录编译image无法进入kernel,有大神吗
[打印本页]
作者:
samir.liu
时间:
2018-4-11 21:08
标题:
x3288CV4.1核心板烧录编译image无法进入kernel,有大神吗
采用官网下载的“x3288_kitkat_170306.tar.bz2”编译的整个系统,编译完后烧录生成的
update.img,还是进入不了系统,具体的串口log如下所示:
DDR Version 1.00 20150318
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=8 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=8 Size=1024MB
Memory OK
Memory OK
OUT
U-Boot 2014.10-RK3288-09 (Nov 27 2017 - 19:51:30)
CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board 3288
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment
GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
no power key node
pmic:ricoh619
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2017-11-27#2.19
empty serial no.
checkKey
vbus = 1
RICOH619_FG capacity = 7, voltage_uV = 3780,state_of_chrg=2
RICOH619_FG capacity = 7, voltage_uV = 3780,state_of_chrg=2
read logo_on switch from dts [0]
RICOH619_FG capacity = 7, voltage_uV = 3780,state_of_chrg=2
Hit any key to stop autoboot: 0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x02000000 (0x0065dfd8)
ramdisk @ 0x05bf0000 (0x00123870)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561ab33 ... OK
Add bank:0000000000000000, 0000000080000000
Starting kernel ...
卡在这里怎么都进不去,有大神遇到过吗?
作者:
samir.liu
时间:
2018-4-16 11:24
这是石沉大海的节奏,和宣传的技术支持不一致啊,说好的“24小时,48小时呢?”
关于技术支持方式调整的通知
一:论坛
在BBS论坛上发贴询问,是取得技术支持的有效途径,我司技术人员将在24小时内回贴,并尽可能的在
48小时内解决所提出的问题。如遇节假日将顺延。
论坛网址:bbs.9tripod.com
技术支持时间:周一到周五,9:00到18:00
作者:
MarcoJun
时间:
2018-11-15 14:38
楼主,解决了吗,我也遇到同样的问题,麻烦分享下解决方法
欢迎光临 九鼎创展论坛 (http://bbs.9tripod.com/)
Powered by Discuz! X3.2