九鼎创展论坛

标题: LED_x6818裸板编程 [打印本页]

作者: laohu360 时间: 2017-11-5 22:19
标题: LED_x6818裸板编程
/*
*LED Test
*
*
*/
#define GPIOB_ALTFN1_26 *((volatile unsigned int *)0xC001B024)
#define GPIOB_OUTENB_26 *((volatile unsigned int *)0xC001B004)
#define GPIOB_OUT_26 *((volatile unsigned int *)0xC001B000)

#define GPIOC_ALTFN0_11 *((volatile unsigned int *)0xC001C020)
#define GPIOC_OUTENB_11 *((volatile unsigned int *)0xC001C004)
#define GPIOC_OUT_11 *((volatile unsigned int *)0xC001C000)

#define GPIOC_ALTFN0_7 *((volatile unsigned int *)0xC001C020)
#define GPIOC_OUTENB_7 *((volatile unsigned int *)0xC001C004)
#define GPIOC_OUT_7 *((volatile unsigned int *)0xC001C000)

#define GPIOC_ALTFN0_12 *((volatile unsigned int *)0xC001C020)
#define GPIOC_OUTENB_12 *((volatile unsigned int *)0xC001C004)
#define GPIOC_OUT_12 *((volatile unsigned int *)0xC001C000)

void delay(unsigned int );

void led_test(void)
{
/*选择管脚的功能1*/
GPIOB_ALTFN1_26 &= ~(3<<20);
GPIOC_ALTFN0_11 &= ~(3<<22);
GPIOC_ALTFN0_7  &= ~(3<<14);
GPIOC_ALTFN0_12 &= ~(3<<24);

GPIOB_ALTFN1_26 |= 1<<20;
GPIOC_ALTFN0_11 |= 1<<22;
GPIOC_ALTFN0_7  |= 1<<14;
GPIOC_ALTFN0_12 |= 1<<24;

/*配置为输出模式*/
GPIOB_OUTENB_26 |= 1<<26;
GPIOC_OUTENB_11 |= 1<<11;
GPIOC_OUTENB_7  |= 1<<7;
GPIOC_OUTENB_12 |= 1<<12;
while(1)
{

/*输出低电平亮灯*/
      GPIOB_OUT_26 &= ~(1<<26);
      delay(0x1000000);
      /*输出高电平灭灯*/
      GPIOB_OUT_26 |= 1<<26;
      delay(0x1000000);

/*输出低电平亮灯*/
      GPIOC_OUT_11 &= ~(1<<11);
      delay(0x1000000);
      /*输出高电平灭灯*/
      GPIOC_OUT_11 |= 1<<11;
      delay(0x1000000);

/*输出低电平亮灯*/
      GPIOC_OUT_7 &= ~(1<<7);
      delay(0x1000000);
      /*输出高电平灭灯*/
      GPIOC_OUT_7 |= 1<<7;
      delay(0x1000000);

/*输出低电平亮灯*/
      GPIOC_OUT_12 &= ~(1<<12);
      delay(0x1000000);
      /*输出高电平灭灯*/
      GPIOC_OUT_12 |= 1<<12;
      delay(0x1000000);
}
}

void delay(unsigned int n)
{
while(n--) ;
}

LED_x6818裸板编程.rar

380.78 KB, 下载次数: 5

作者: nejicc 时间: 2018-4-14 11:38
我也在学这块板子，能不能留个联系方式方便交流

作者: laohu361 时间: 2018-10-24 09:38

nejicc 发表于 2018-4-14 11:38
我也在学这块板子，能不能留个联系方式方便交流

1983170646@qq.com

欢迎光临九鼎创展论坛 (http://bbs.9tripod.com/)