Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Nov 13 2012 17:02:48
Microsoft Windows CE Bootloader for the Samsung SMDKV210 Version 2.5 Built Jun 6 2013
ARGS: Initializing BSP_ARGS back to initial state.
Initialize IRQ Vector Tables
EOTG: USB DeInit 0xE59FF3D8
[SDMMC:INF] This MMC is made on SPEC 4.2
[SDMMC:INF] This MMC is made on SPEC 4.2
[SDMMC:INF] SDHC_GET_EXTCSD() This MMC is Spec 4.2 , Total sector 7733248
[SDMMC:INF] SDHC_GET_EXTCSD() Card Type 0x7
[SDMMC:INF] SDHC_CONFIG_CLK() Card Working Frequency = 24MHz
[SDMMC:INF] SDHC_CONFIG_CLK() Set MMC High speed mode OK!!
[SDMMC:INF] SDHC_SET_BUS_WIDTH() 4Bit Data Bus enables
SDHC_INIT!!! g_dwIsSDSPEC20 : 0,g_dwMMCSpec42:1,g_dwIsMMC:1
HSMMC_Init Success!!!
BP_Init++
BP_Init] pMemory=0xa7600000
BP_Init] g_pbMBRSector=0xa7600000
BP_Init] g_pbBlock=0xa7600200
BP_Init] g_pSectorInfoBuf=0xa7610200
BP_Init--
TOC_Read: 17
### HSMMC::READTOC MMC from 0xa31 to 0x8 0x878442c0
[SUN] g_ImageType: 0x8
TOC {
dwSignature: 0x434F544E
BootCfg
{
ConfigFlags: 0x2020
dwBootDelay: 0x5
IP: 0.0.0.0
MAC Address: 00:00:00:00:00:00
Port: 0.0.0.0
SubnetMask: 255.255.255.0
}
ID[0]
{
dwVersion: 0x20005
dwSignature: 0x544F4245
String: eboot.bin
dwImageType: 0x1
dwTtlSectors: 0x400
dwLoadAddress: 0x87700000
dwJumpAddress: 0x87700000
dwStoreOffset: 0x1
}
ID[1]
{
dwVersion: 0x0
dwSignature: 0x0
String:
dwImageType: 0x0
dwTtlSectors: 0x0
dwLoadAddress: 0x0
dwJumpAddress: 0x0
dwStoreOffset: 0x0
}
ID[2]
{
dwVersion: 0x0
dwSignature: 0x52435342
String: BOOTIMAG
dwImageType: 0x4
dwTtlSectors: 0xA20
dwLoadAddress: 0xA0020000
dwJumpAddress: 0xA0020000
dwStoreOffset: 0x1
}
ID[3]
{
dwVersion: 0x1
dwSignature: 0x48534643
String: NK
dwImageType: 0x8
dwTtlSectors: 0x18560
dwLoadAddress: 0x80020000
dwJumpAddress: 0x80027D5C
dwStoreOffset: 0x0
}
ID[4]
{
dwVersion: 0x0
dwSignature: 0x0
String:
dwImageType: 0x0
dwTtlSectors: 0x0
dwLoadAddress: 0x0
dwJumpAddress: 0x0
dwStoreOffset: 0x0
}（卡在这里不动）
