九鼎创展论坛

标题: SDIO 8723BSWIFI接口 [打印本页]

作者: lichang70 时间: 2016-12-10 14:34
标题: SDIO 8723BSWIFI接口
想问下九鼎的X4418支持SDIO wifi吗。

我移植了8723BSwifi后，只能打开wifi的设置，搜不到AP。
一直重复打印[ 1404.523000] RTL871X: cfg80211_rtw_scan(wlan0)
[ 1404.528000] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
[ 1404.539000] RTL871X: ===>phy_SwChnl8723B: Channel = 1
[ 1404.54600RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=53 len=7
[ 1404.555000] RTL871X: rtl8723b_set_FwBtMpOper_cmd: idx=0 ver=0 reqnum=10 param1=0x00 param2=0x00
[ 1404.570000] RTL871X: rtl8723bs_recv_tasklet()-204: : next pkt len(a99a8048,12626) exceed ptail(a99a8069)!
[ 1404.583000] RTL871X: rtl8723bs_recv_tasklet()-204: : next pkt len(a99ac048,12874) exceed ptail(a99ac069)!
[ 1404.656000] RTLL871X: ===>phy_SwChnl8723B: Channel = 2
[ 1404.764000] RTL871X: ===>phy_SwChnl8723B: Channel = 3
[ 1404.873000] RTL871X: ===>phy_SwChnl8723B: Channel = 4
[ 1404.981000] RTL871X: ===>phy_SwChnl8723B: Channel = 5
[ 1405.089000] RTL871X: ===>phy_SwChnl8723B: Channel = 6
[ 1405.198000] RTL871X: ===>phy_SwChnl8723B: Channel = 7
[ 1405.306000] RTL871X: ===>phy_SwChnl8723B: Channel = 8
[ 1405.368000] RTL871X: IsBtDisabled=0, IsBtControlLps=0
[ 1405.415000] RTL871X: ===>phy_SwChnl8723B: Channel = 9
[ 1405.523000] RTL871X: ===>phy_SwChnl8723B: Channel = 10
[ 1405.631000] RTL871X: ===>phy_SwChnl8723B: Channel = 11
[ 1405.741000] RTL871X: ===>phy_SwChnl8723B: Channel = 12
[ 1405.850000] RTL871X: ===>phy_SwChnl8723B: Channel = 13
[ 1405.958000] RTL871X: ===>phy_SwChnl8723B: Channel = 1
[ 1405.967000] RTL871X: survey done event(0) band:0 for wlan0
[ 1405.973000] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=56 len=7
[ 1405.980000] RTL871X: rtl8723b_set_FwBtMpOper_cmd: idx=0 ver=0 reqnum=11 param1=0x00 param2=0x00
[ 1405.990000] RTL871X: rtw_indicate_scan_done(wlan0)

作者: hhy 时间: 2016-12-13 15:42
我们支持USB 8723模块

欢迎光临九鼎创展论坛 (http://bbs.9tripod.com/)