九鼎创展论坛

标题: Android5.1 请问ibox4418兼容x4418吗？？ [打印本页]

作者: hushui 时间: 2016-12-7 10:02
标题: Android5.1 请问ibox4418兼容x4418吗？？
本帖最后由 hushui 于 2016-12-7 10:07 编辑

我测试Android4.4,成功ibox4418兼容x4418。
我手里只有ibox4418/HDMI的板子

用Android5.1/x4418的一直不成功, kernel启动有错误。
如果自己编译升级在ibox4418也是一样的错误

x4818/Android5.1用的是 http://pan.baidu.com/s/1jHEhPAI

附件市log

ibox4418_try_Android5.1.zip

26.81 KB, 下载次数: 4

作者: hushui 时间: 2016-12-7 10:09
1. 第一个错误似乎可以继续

[ 2.615000] ------------[ cut here ]------------
[ 2.620000] WARNING: at kernel/irq/manage.c:1196 __free_irq+0xa0/0x1bc()
[ 2.627000] Trying to free already-free IRQ 39
[ 2.631000] Modules linked in:
[ 2.634000] [<c00153f0>] (unwind_backtrace+0x0/0x134) from [<c0044784>] (warn_slowpath_common+0x54/0x64)
[ 2.644000] [<c0044784>] (warn_slowpath_common+0x54/0x64) from [<c00447c4>] (warn_slowpath_fmt+0x30/0x40)
[ 2.654000] [<c00447c4>] (warn_slowpath_fmt+0x30/0x40) from [<c00ad0f0>] (__free_irq+0xa0/0x1bc)
[ 2.663000] [<c00ad0f0>] (__free_irq+0xa0/0x1bc) from [<c00ad2a0>] (free_irq+0x4c/0xa4)
[ 2.671000] [<c00ad2a0>] (free_irq+0x4c/0xa4) from [<c041030c>] (nxp_csi_unregister+0x14/0x20)
[ 2.680000] [<c041030c>] (nxp_csi_unregister+0x14/0x20) from [<c040cbf8>] (register_nxp_capture+0x1c8/0x2ac)
[ 2.690000] [<c040cbf8>] (register_nxp_capture+0x1c8/0x2ac) from [<c063033c>] (nxp_v4l2_probe+0x214/0x3b0)
[ 2.699000] [<c063033c>] (nxp_v4l2_probe+0x214/0x3b0) from [<c02b3398>] (platform_drv_probe+0x14/0x18)
[ 2.709000] [<c02b3398>] (platform_drv_probe+0x14/0x18) from [<c02b1e94>] (driver_probe_device+0xb4/0x364)
[ 2.719000] [<c02b1e94>] (driver_probe_device+0xb4/0x364) from [<c02b2214>] (__driver_attach+0x8c/0x90)
[ 2.728000] [<c02b2214>] (__driver_attach+0x8c/0x90) from [<c02b01d0>] (bus_for_each_dev+0x60/0x94)
[ 2.737000] [<c02b01d0>] (bus_for_each_dev+0x60/0x94) from [<c02b143c>] (bus_add_driver+0xd4/0x290)
[ 2.746000] [<c02b143c>] (bus_add_driver+0xd4/0x290) from [<c02b2808>] (driver_register+0x78/0x13c)
[ 2.756000] [<c02b2808>] (driver_register+0x78/0x13c) from [<c00087a8>] (do_one_initcall+0x11c/0x174)
[ 2.765000] [<c00087a8>] (do_one_initcall+0x11c/0x174) from [<c08e29a8>] (kernel_init+0x140/0x1d4)
[ 2.774000] [<c08e29a8>] (kernel_init+0x140/0x1d4) from [<c000f7fc>] (kernel_thread_exit+0x0/0x8)

3. 第二个错误为什么挂不上root  ？？？

[ 3.667000] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 3.675000] Please append a correct "root=" boot option; here are the available partitions:
[ 3.683000] b300       7634944 mmcblk0  driver: mmcblk
[ 3.689000] b301          65536 mmcblk0p1 00000000-0000-0000-0000-000000000000
[ 3.696000] b302       772096 mmcblk0p2 00000000-0000-0000-0000-000000000000
[ 3.704000] b303       438272 mmcblk0p3 00000000-0000-0000-0000-000000000000
[ 3.711000] b304             1 mmcblk0p4 00000000-0000-0000-0000-000000000000
[ 3.719000] b305          8192 mmcblk0p5 00000000-0000-0000-0000-000000000000
[ 3.727000] b306          22528 mmcblk0p6 00000000-0000-0000-0000-000000000000
[ 3.734000] b307       6324224 mmcblk0p7 00000000-0000-0000-0000-000000000000
[ 3.742000] b310          4096 mmcblk0boot1  (driver?)
[ 3.747000] b308          4096 mmcblk0boot0  (driver?)
[ 3.753000] b318       3918848 mmcblk1  driver: mmcblk
[ 3.758000] b319       3656704 mmcblk1p1 00000000-0000-0000-0000-000000000000
[ 3.766000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 3.774000] [<c00153f0>] (unwind_backtrace+0x0/0x134) from [<c0636f64>] (panic+0xa0/0x1d8)
[ 3.783000] [<c0636f64>] (panic+0xa0/0x1d8) from [<c08e2d60>] (mount_block_root+0x194/0x224)
[ 3.791000] [<c08e2d60>] (mount_block_root+0x194/0x224) from [<c08e2ef8>] (mount_root+0x108/0x110)
[ 3.800000] HDMI HPD State 0x0

作者: hushui 时间: 2016-12-7 11:44
x4418和 ibox4418的 boot.img的kernel是否cmdline有么有不一样？？看上去我编译的这个启动root设备不行

作者: hushui 时间: 2016-12-7 11:52
Hi
我用你们官方的Android5.1

[ 69.626000] init: untracked pid 1160 exited
[ 80.183000] init: untracked pid 1278 exited
[ 84.400000] init: untracked pid 1326 exited
[ 89.723000] init: untracked pid 1393 exited
[ 99.346000] init: untracked pid 1528 exited
串口一直在打印上面的信息，序号递增

查询你们论坛说    是内核跟系统文件不匹配

这个应该怎么弄？？？

欢迎光临九鼎创展论坛 (http://bbs.9tripod.com/)