标题: Win CE 6.0 Boot error when transmit EBOOT.nb0 using inand [打印本页] 作者: haseebzahid 时间: 2014-2-24 17:32 标题: Win CE 6.0 Boot error when transmit EBOOT.nb0 using inand Where can i find the Logo.bin file.
TOC_Write ERROR: INVALID_IMAGE[3] Signature: 0x0] g_pBSPArgs->bDVFSDisable: 0
<logo>Logo is not valid bitmap format!
<logo>Read data error or logo is not valid bitmap format!
<logo>show default logo !
<eboot>dwLeft=240, dwTop=120; width=320, height=240
------GPH02 DAT dwRet =0x1
Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 2 seconds.
***************************************************************
** System Configuration **
***************************************************************
U) Download New image from USB
L) Download logo.bin from USB
K) Download NK.BIN from SD
E) Download eboot.nb0 from SD
I) Download logo.bin from SD
T) TEST ALL OS DOWNLOAD FROM SD
X: Exit to previous menu
---------------------------------
Enter Choice >> x
System ready!
Preparing for download...
OEMLaunch!
+OEMLaunch. dwLaunchAddr = 0x0
INFO: g_ImageType: 0x8
OEMLaunch: IMAGE_TYPE_NK
<ERROR> There is no NK in the NAND flash memory
INFO: OEMLaunch: Jumping to Physical Address 0x00000000h (Virtual Address 0x00000000h)...