CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment
GetParam
check parameter success
failed to prepare fdt from boot!
no power key node
can't find dts node for act8846
can't find dts node for rk808
can't find dts node for rk818
No pmic detect.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2016-02-19#2.19
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
pll_src = 0, dclk_hz = 78000000, dclk_div = 5
failed to find part:logo
no fuel gauge found
rk_pwm_config:brightness:255
got recovery cmd from misc.
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x02000000 (0x0061ace8)
ramdisk @ 0x05bf0000 (0x00faaa1c)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561b422 ... OK
Add bank:0000000000000000, 0000000080000000